钻柱偏心旋转对环空摩阻压降影响的数值模拟研究  

Numerical Simulation of the Effects of Eccentric Rotation of the Drill String on Annular Frictional Pressure Drop

作　　者：田野 蒋东雷 马传华 徐一龙 于晓东 宋洵成[2] TIAN Ye;JIANG Donglei;MA Chuanhua;XU Yilong;YU Xiaodong;SONG Xuncheng(Hainan Branch of CNOOC Ltd.,Haikou,Hainan,570312,China;School of Petroleum Engineering,China University of Petroleum(East China),Qingdao,Shandong,266580,China)

机构地区：[1]中海石油(中国)有限公司海南分公司,海南海口570312 [2]中国石油大学(华东)石油工程学院,山东青岛266580

出　　处：《石油钻探技术》2022年第5期42-49,共8页Petroleum Drilling Techniques

基　　金：国家自然科学基金项目“钻井井下气液固多相流中超声波传播特性及气侵监测方法研究”(编号:52074326);中海石油(中国)有限公司重大科技专项项目“南海西部油田上产2000万方关键技术研究”(编号:CNOOC-KJ 135 ZDXM 38 ZJ 01 ZJ)资助。

摘　　要：准确预测钻柱偏心旋转工况下的环空摩阻压降是复杂结构井控压钻井的重要理论基础,但常规钻井液环空摩阻压降计算方法无法直接计算复杂结构井的环空摩阻压降。为此,应用数值模拟方法,分析了偏心度(0~67.42%)和钻柱转速(0~114.65 r/min)对典型环空(Ф127.0 mm钻杆和Ф215.9 mm井眼)中摩阻压降梯度的影响。分析结果表明:偏心度小于45.00%时,转速和偏心度对摩阻压降梯度影响较弱,摩阻压降梯度随转速增大略有降低,随偏心度增大而增大;偏心度大于45.00%时,低转速(<60 r/min)下摩阻压降梯度随偏心度增大而降低,高转速(≥60 r/min)下摩阻压降梯度随偏心度增大而略有增大。基于数值模拟结果,建立了偏心度分类的无因次偏心环空摩阻压降梯度预测模型,计算了南海某水平井Ф215.9 mm井段的ECD,并与PWD测试结果进行了对比,平均相对误差为0.45%,表明该模型具有较好的准确性。研究结果表明,无因次偏心旋转环空摩阻压降计算模型可以精细描述环空压力场和准确计算ECD,为控压钻井水力参数优化提供指导。Accurate prediction of the annular frictional pressure drop under eccentric rotation of drill string is an important theoretical basis for managed pressure drilling(MPD) in complex structure wells. However, the conventional calculation methods for the annular frictional pressure drop of drilling fluid cannot be directly applied to calculating the annular frictional pressure drop in complex structure wells. For this reason, the influences of eccentricity(0-67.42%)and the rotational speed(0-114.65 r/min)of the drill string on the frictional pressure drop gradient in a typical annulus(created by a Ф127.0 mm drill pipe and a Ф215.9 mm wellbore) were analyzed. The results show that when the eccentricity is lower than 45.00%, the rotational speed and eccentricity have a weak influence on the frictional pressure drop gradient. Specifically, the frictional pressure drop gradient decreases slightly with the increase of rotational speed but increases with the increase of eccentricity;when the eccentricity is higher than 45.00%, the frictional pressure drop gradient decreases with the increase of eccentricity at low rotational speed(<60 r/min), and the friction pressure drop gradient increases slightly with the increase of eccentricity at high rotational speed(>60 r/min). According to the numerical simulation results, a dimensionless frictional pressure drop gradient prediction model with eccentricity classification was built. The equivalent circulating density(ECD) of Ф215.9 mm section of a horizontal well in the South China Sea was calculated by the proposed model. The results were then compared with the pressure-whiledrilling(PWD) test results, with an average relative error of 0.45%, indicating that the proposed model has favorable accuracy. This study concludes that the proposed calculation model of the dimensionless annular frictional pressure drop under eccentric rotation can precisely describe the annular pressure field and ECD, and provide guidance for the hydraulic parameter optimization of MPD.

关 键 词：钻柱偏心 钻柱旋转 环空摩阻 环空压降 数值模拟 预测模型 

分 类 号：TE21[石油与天然气工程—油气井工程]