与房间热耦合的风机盘管通断控制研究  

Research on on-off valve control of fan-coil unit thermal coupling with room

作　　者：杨明杰 高岩[2] 燕达[3] Yang Mingjie;Gao Yan;Yan Da(Beijing Energy Conservation&Sustainable Urban and Rural Development Collaboration Innovation Center,Beijing University of Civil Engineering and Architecture,Beijing;Key Laboratory of HVAC,Beijing University of Civil Engineering and Architecture,Beijing;Tsinghua University,Beijing)

机构地区：[1]北京建筑大学北京节能减排与城乡可持续发展省部共建国家协同创新中心,北京 [2]北京建筑大学供热供燃气通风空调工程北京市重点实验室,北京 [3]清华大学,北京

出　　处：《暖通空调》2022年第10期144-149,134,共7页Heating Ventilating & Air Conditioning

基　　金：北京市教委科技计划重点项目(编号:KZ202110016022)。

摘　　要：为了在建筑热模拟软件DeST中实现通断控制的空调末端与建筑房间的热耦合模拟计算,基于DeST软件内核中的基础室温,建立了小时间步长条件下通断调节空调末端供冷热量与室内温度的热耦合仿真模型。将该模型的模拟结果与实验结果进行了对比,证明该模型可以较准确地模拟受控风机盘管末端供冷下房间的温度变化规律。使用该模型对一个建筑进行了模拟仿真,与非房间耦合模型进行了对比,结果显示,该模型能更真实地反映空调末端受控情况下的通断情况及房间温度的实时变化情况。In order to realize the thermal coupling simulation calculation between the air conditioning terminal with on-off control and the building in the thermal simulation software DeST,based on the basic room temperature in the DeST software kernel,this paper establishes a thermal coupling simulation model of the cooling and heating capacity of the air conditioning terminal with on-off control and the indoor temperature under the condition of a small time step.The simulation results of the model are compared with the experimental results,and it is proved that the model can accurately simulate the indoor temperature change under the controlled fan-coil unit cooling.The model is used to simulate a building and compared with the uncoupled model.The results show that the model can more truly reflect the on-off situation of the controlled air conditioning terminal and the real-time change of the indoor temperature.

关 键 词：风机盘管 房间 热耦合 空调末端 通断控制 室内温度 建筑热模拟 

分 类 号：TU831.3[建筑科学—供热、供燃气、通风及空调工程]