BIM-based construction technologies for precast foamed lightweight concrete wallboards  

基于BIM的预制泡沫轻质混凝土墙板建造技术

作　　者：Lin Jiankang Chen Zhongfan Ding Xiaomeng Feng Yan Zhang Jiaheng 林健康;陈忠范;丁小蒙;冯岩;张家珩(东南大学混凝土及预应力混凝土结构教育部重点实验室,南京210096)

机构地区：[1]Key Laboratory of Concrete and Pre-stressed Concrete Structures of Ministry of Education,Southeast University,Nanjing 210096,China

出　　处：《Journal of Southeast University(English Edition)》2022年第3期270-277,共8页东南大学学报（英文版）

基　　金：The National Key Research and Development Program of China(No.2020YFD1100404-4);the National Natural Science Foundation for Young Scientists of China(No.52108120);the National Natural Science Foundation for Young Scientists of Jiangsu Province(No.BK20210258)。

摘　　要：To promote the visualisation and informatisation of the construction process of precast foamed lightweight concrete wallboards(PFLCWs),from the analysis of the construction requirements of PFLCWs,three key construction technologies based on building information modelling(BIM),namely,parameterised modelling for the PFLCW layout design,drawing generation to draw the PFLCW layout and quantity statistics for extracting PFLCW quantities,are proposed.Then,a reinforced concrete(RC)frame infilled with PFLCW is considered the test model to verify the feasibility of the aforementioned technologies.The results show that PFLCW layout design can be accomplished rapidly and visually using parameterised modelling technology.The PFLCW layout diagram can be generated directly using drawing generation technology.The proposed quantity statistics technology enables the automatic export of PFLCW bills of quantities.The built parameterised model helps construction workers rapidly and intuitively understand the specific layout details of PFLCWs.Moreover,the generated layout drawing and the bills of quantities based on the parameterised model can guide the production and on-site installation of PFLCWs.The research conclusions can serve as a practical guide and technical support for PFLCW engineering applications.为促进预制泡沫轻质混凝土墙板(PFLCW)建造过程的可视化和信息化,通过分析PFLCW的建造需求,提出了基于建筑信息模型(BIM)的3项关键建造技术:用于PFLCW布局设计的参数化建模技术、绘制PFLCW布板图的图纸生成技术和提取PFLCW工程量的工程量统计技术.然后,将PFLCW填充的钢筋混凝土(RC)框架作为测试模型,验证所提技术的可行性.结果表明,参数化建模技术可以实现PFLCW的快速、可视化布局设计.采用图纸生成技术可以直接生成PFLCW布板图.所提工程量统计技术可以自动导出PFLCW的工程量清单.建立的参数化模型有助于施工人员快速、直观地了解PFLCW的具体布置细节.基于参数化模型生成的布置图和工程量清单可指导PFLCW的生产和现场安装.研究结果可作为PFLCW工程应用的有益指导和技术支持.

关 键 词：building information modelling(BIM) precast foamed lightweight concrete wallboard(PFLCW) construction visualisation and informatisation parameterised modelling quantity statistics 

分 类 号：TU17[建筑科学—建筑理论]