窄矩形通道污垢沉积数值仿真  

Numerical Simulation of Fouling Deposition in Narrow Rectangular Channel

作　　者：谭佳琦 刘达霖 刘晓晶[1] Tan Jiaqi;Liu Dalin;Liu Xiaojing(School of Nuclear Science and Engineering,Shanghai Jiao Tong University,Shanghai,200240,China)

机构地区：[1]上海交通大学核科学与工程学院,上海200240

出　　处：《核动力工程》2022年第5期76-81,共6页Nuclear Power Engineering

基　　金：国家自然科学基金(11922505)。

摘　　要：为研究窄矩形通道内CaSO4溶液由于析晶沉积产生的污垢及对换热的影响,本研究基于合理的污垢沉积、污垢剥蚀与污垢热阻模型,利用FLUENT软件结合用户自定义函数(UDF)对一定热流密度、入口流速、入口温度和流体浓度的流体进行了析晶沉积模拟计算。研究结果表明了此工质的污垢产生情况和对换热的影响,同时得到热流密度、入口流速和流体浓度3种影响因素对污垢沉积的影响:污垢热阻随热流密度增大而增大,随入口流速增大而减小,随流体浓度增大而增大。本研究可用于模拟板状燃料元件窄矩形通道由于析晶导致的污垢沉积过程。In order to study the fouling caused by the crystallization deposition of CaSO_(4) solution in the narrow rectangular channel and its effect on heat transfer,based on the reasonable fouling deposition,fouling erosion and fouling thermal resistance models,the crystallization deposition simulation calculation of fluids with certain heat flux,inlet velocity,inlet temperature and fluid concentration is carried out by using FLUENT software and user-defined function(UDF).The research results show the fouling generation of this working medium and its influence on heat transfer,and the influence of three factors,namely heat flux,inlet velocity and fluid concentration,on fouling deposition is obtained:the fouling resistance increases with the increase of heat flux,decreases with the increase of inlet velocity,and increases with the increase of fluid concentration.This study can be used to simulate the fouling deposition process in the narrow rectangular channel of plate-shaped fuel elements due to crystallization.

关 键 词：窄矩形通道 析晶沉积 FLUENT 污垢沉积 污垢剥蚀 污垢热阻 

分 类 号：TL334[核科学技术—核技术及应用]