SiO_(2)微粉添加量对刚玉浇注料抗热震性的影响  

Effect of SiO_(2) fume addition on thermal shock resistance of corundum castables

作　　者：李玉川 张三华[1] 秦红彬 陈卢[1] Li Yuchuan;Zhang Sanhua;Qin Hongbin;Chen Lu(State Key Laboratory of Advanced Refractories,Sinosteel Luoyang Institute of Refractories Research Co.,Ltd.,Luoyang 471039,Henan,China;不详)

机构地区：[1]中钢集团洛阳耐火材料研究院有限公司先进耐火材料国家重点实验室,河南洛阳471039

出　　处：《耐火材料》2022年第5期407-411,共5页Refractories

摘　　要：为了提高RH炉浸渍管用刚玉浇注料的抗热震性,在其中加入不同量的SiO_(2)微粉(质量分数分别为0、0.1%、0.2%、0.3%、0.4%)。模拟实际工况,采用先预热后蘸钢的方法对试样进行热冲击,并利用XRD、SEM、FactSage 8.0等手段分析了SiO_(2)微粉添加量对浇注料抗热震性的影响。结果表明:1加入SiO_(2)微粉可以改善RH炉浸渍管用刚玉基浇注料的抗热震性;随着SiO_(2)微粉加入量的增加,试样在蘸钢热震条件下的抗折强度保持率呈先增大后减小的变化趋势,SiO_(2)微粉加入量为0.2%(w)时抗折强度保持率达到最大值60%。2SiO_(2)微粉提高RH炉浸渍管用刚玉基浇注料抗热震性的机制为:加入SiO_(2)微粉后,基质中生成的以霞石、黄长石为主的高温液相,缓冲了试样在蘸钢热震条件下的热应力。In order to improve the thermal shock resistance of corundum castables for snorkels of RH furnaces,SiO_(2) fume was added with different additions(0,0.1%,0.2%,0.3%,and 0.4%,by mass).The actual working condition was simulated,thermal shock was conducted by preheating and then dipping into steel melt,and the influence of the SiO_(2) fume addition on the thermal shock resistance of the castables was investigated by XRD,SEM,and FactSage 8.0.The results show that:(1)the SiO_(2) fume addition can improve the thermal shock resistance of the corundum castables for RH snorkels;with the SiO_(2) fume addition increasing,the modulus of rupture retention ratio of the specimen under steel dipping thermal shock increases first and then decreases,reaching the maximum(60%)with 0.2% SiO_(2) fume addition;(2)the mechanism that SiO_(2) fume improves the thermal shock resistance of corundum castables for RH snorkels is as follows:after adding SiO_(2) fume,the high temperature liquid phases such as nepheline and melilite formed in the matrix can buffer the thermal stress of the specimens caused by thermal shock under the steel dipping condition.

关 键 词：刚玉浇注料 抗热震性 SIO2微粉 高温液相 

分 类 号：TQ175[化学工程—硅酸盐工业]