检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:范铭轩 刘景源[1] FAN Ming-xuan;LIU Jing-yuan(Jiangxi Key Laboratory of Micro Aeroengine,Aircraft Engineering College,Nanchang Hangkong University,Nanchang 330063,China)
机构地区:[1]南昌航空大学飞行器工程学院江西省微小航空发动机重点实验室,江西南昌330063
出 处:《推进技术》2022年第9期107-121,共15页Journal of Propulsion Technology
基 金:国家自然科学基金(11562012);江西省微小航空发动机重点实验室开放基金(Ef202006072)。
摘 要:为了研究分流叶片前缘掠角对微小型离心叶轮流场及气动性能的影响,应用数值模拟及理论分析,对一带有分流叶片的离心叶轮进行了研究。结果表明:分流叶片前缘后掠增强离心叶轮气动性能的机制,一方面为分流叶片对主叶片泄漏涡的分流效应,以及分流叶片攻角增大致使其吸力面高速低压气流对主叶片泄漏涡的引射效应;另一方面,随分流叶片前掠角度增大,其肩部的膨胀及压缩效应增强,对主叶片压力面气动干扰增强,使主叶片压力面负荷降低,当分流叶片后掠角度增大时,气流相对分流叶片前缘攻角变大使分流叶片气动负荷变大,另外,攻角变大导致分流叶片吸力面气流加速、流线弯曲变大,气动负荷增大。在进行分流叶片设计时,权衡结构重量、气动性能等因素,建议分流叶片前缘后掠角取值在8°~16°。To investigate the effects of swept angle of leading edge of the splitter blade on flowfield characteristics and aerodynamic performance of a miniature centrifugal compressor,a miniature centrifugal compressor was studied based on theoretical analysis and numerical simulation.The results show that the mechanisms of the leading-edge backward sweep of splitter blade improving the performance of the compressor are,on the one hand,the splitting effect of the splitter blade on the leakage vortex of the main blade and the ejection effect of the high-speed and low-pressure airflow near the suction surface of the splitter blade on the leakage vortex because of increasing of angle of attack near the splitter blade.On the other hand,the expansion and compression effects of the flowfield near the shoulder of the splitter blade are enhanced,the aerodynamic effects on the pressure surface of the main blade are also promoted,and the load on the pressure surface of the main blade is reduced,with the increase of the forward-swept angle of the splitter blade.When the backward-swept angle of the splitter blade is enlarged,the aerodynamic load on the splitter blade increases with the change of the angle of attack.In addition,the increased angle of attack leads to the acceleration of the flow on the suction surface of the splitter blade and the magnified curvature of the streamline and the aerodynamic load is amplified simultaneously.In the process of splitter blade design,it is necessary to trade off among the structural weight,aerodynamic performance and other factors,and the backward-swept angle of the leading-edge of the splitter blade should be in the range between 8°and 16°.
关 键 词:离心压气机 分流叶片 前缘掠角 流场特性 气动性能 数值模拟
分 类 号:V231.1[航空宇航科学与技术—航空宇航推进理论与工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:18.222.175.173