Reconfiguration of PV Arrays(T-C-T,B-L,H-C)Considering Wiring Resistance  

作　　者：Kandipati Rajani Tejavathu Rame 

机构地区：[1]Electrical and Electronics Engineering Department,National Institute of Technology Andhra Pradesh,West Godavari-534101,India

出　　处：《CSEE Journal of Power and Energy Systems》2022年第5期1408-1416,共9页中国电机工程学会电力与能源系统学报（英文）

摘　　要：Partial shadings on the photovoltaic(PV)array causes reduction in maximum power generation.Reconfiguration of PV arrays plays an important role in increasing the maximum power generation from PV array configurations under partial shadings.In general,partial shadings on the PV arrays are concentrated on a group of modules.Therefore,the distribution of shading over the array increases the maximum power generation.This paper uses a modified Sudoku pattern to increase the maximum power generation from the PV array configurations.The PV array configurations are analyzed by considering column wiring resistance and cross ties resistance.The modified Sudoku pattern is applied to Total-Cross-Tied(T-C-T),Bridge-Link(B-L)and Honey-Comb(H-C)configurations and their performances are analyzed under various shading patterns,such as short narrow,short wide,long narrow,long wide,middle and diagonal.The specifications,such as Global Maximum Power(GMP),Mismatch losses,Fill Factor,Efficiency are considered to see the efficacy of various PV array configurations and their reconfigurations.From the results,it can be concluded that reconfigured T-C-T PV array generates the highest GMP compared to other configurations under considered shading patterns.

关 键 词：Bridge-link efficiency fill factor global maximum power honey-comb photovoltaic array RECONFIGURATION SUDOKU Total-Cross-Tied 

分 类 号：TM615[电气工程—电力系统及自动化]