检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:姜洪妍 王兴[1] 陈德应[1] 季一勤[1] 樊荣伟[1] JIANG Hongyan;WANG Xing;CHEN Deying;JI Yiqin;FAN Rongwei(National Key Laboratory of Science and Technology on Tunable Laser,Harbin Institute of Technology,Harbin 150080,China)
机构地区:[1]哈尔滨工业大学可调谐激光技术国家级重点实验室,哈尔滨150080
出 处:《光子学报》2022年第9期128-137,共10页Acta Photonica Sinica
基 金:国家自然科学基金(No.62192774);国家重点研发计划(No.2019YFA0705204)。
摘 要:为解决信息采集中环境因素的干扰,提高目标判断精度,通过滤光技术,利用不同波段能量比的差异,对同时采集到的波段信息进行能量对比。根据系统要求,在Si基底设计并制备了中红外3.5~5μm波段能量调节滤光膜,选择Ge和SiO作为镀膜材料。依据光学薄膜基础理论,通过建立新的评价函数,结合Macloed膜系设计软件,实现0~30°入射3.5~5μm波段能量调节滤波器的设计与制备。研究能量调节滤光膜的微观组成,分析其在温湿试验前后的光学性能变化的原因,综合利用Ge和SiO吸潮前后光学参数,优化能量调节滤光膜膜系设计,解决其在潮湿环境中长期使用光学性能下降的问题。测试结果表明,制备的能量调节滤波器0°入射时,吸潮前能量调节比为1∶40.9,吸潮后能量调节比为1∶40.7;30°入射时,吸潮前能量调节比为1∶40.04,吸潮后能量调节比为1∶39.04,满足系统要求。In order to reduce the interference of environmental factors in information collection and improve the detection accuracy,we propose to suppress the 3.5~4.2μm band of light and make the 4.4~5μm band of light high transmittance by thin film technology.A kind of 3.5~5μm mid-infrared energy regulation filter is developed.The filter can suppress the stray light in the background band and allow the target signal to pass through in a certain proportion with the background signal.The infrared imaging system with the filter can collect the energy of different bands at the same time in a certain angle range for comparison,and use the different target information energy ratio of different bands to solve the problem of environmental interference in information acquisition and improve the detection accuracy.According to the requirements of the imaging system,a mid-infrared energy regulation filter film was designed and fabricated on a Si substrate,and the working wavelength range was 3.5~5μm.For spectral requirements of the filter,the matching between the film material and the substrate,the transparency zone,the mechanical strength,the refractive index and the stress matching between the film material should be considered.Ge and SiO were selected as the high refractive index material and low refractive index material,which spectral transmittance data could be tested by Fourier infrared spectrometer.Then the spectral data measured were fitted to calculate the accurate optical constants.The evaluation function can effectively evaluate the advantages and defects of the film design.In this paper,the proportion requirement of the energy regulation filter is strict,and the existing evaluation function is difficult to design a film design with smooth spectral curve and balanced energy distribution.According to the basic theory of optical film,a new evaluation function was established to reduce the tolerance,balance the relationship between the number of layers and thickness of the film and the evaluation function,and the Macloe
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.7