复杂曲面粘接结构的阵列成像检测  

Array imaging detection for complex curved surface bonding structure

作　　者：陆铭慧[1] 刘洋 陈祎婷 刘勋丰[1] 黄嘉诚 董星宇 LU Minghui;LIU Yang;CHEN Yiting;LIU Xunfeng;HUANG Jiacheng;DONG Xingyu(Key Laboratory of Nondestructive Testing,Ministry of Education,Nanchang Hangkong University,Nanchang 330063,China)

机构地区：[1]南昌航空大学无损检测技术教育部重点实验室,南昌330063

出　　处：《无损检测》2022年第9期7-12,共6页Nondestructive Testing

摘　　要：直升机桨叶前缘加热组件为复杂曲面多层粘接结构,其粘接质量影响着桨叶乃至整机的安全。目前针对加热组件脱粘缺陷的超声检测,存在缺陷信号提取困难、单探头检测效率低等问题。针对存在的问题,研究了声波在多层介质中的传播规律,明确了结构中不锈钢/橡胶粘接层缺陷的识别方法,针对加热组件的复杂形状及扫查需要制作了阵列探头,对试样及实际加热组件进行了阵列成像检测。结果表明,采用阵列成像方法可检测加热组件不锈钢/橡胶层的脱粘缺陷,且缺陷形貌准确清晰。The leading edge heating component of helicopter blade is the multi-layer bonding structure with complex curved surface, and its bonding quality affects the safety of blade and even the whole machine. At present, there are some problems in ultrasonic detection of debonding defects of heating components, such as difficulty in extracting defect signal and low efficiency of single probe detection. Aiming at the existing problems, the propagation law of sound wave in multi-layer medium was studied, and the defect identification method of stainless steel/rubber bonding layer in the structure was clarified. According to the complex shape and scanning needs of heating components, an array probe was made, and the array imaging detection was carried out on the sample and actual heating components. The results show that the debonding defect of stainless steel/rubber layer of heating module can be detected by array imaging method, and the defect morphology was accurate and clear.

关 键 词：桨叶 脱粘缺陷 多层结构 阵列成像 

分 类 号：TG115.28[金属学及工艺—物理冶金] V257[金属学及工艺—金属学]