氨法脱硫浆液中304不锈钢闭塞电池模拟锈层的优选  

Optimization of Simulated Rust Layer of 304 Stainless Steel Occluded Cell in Ammonia Desulphurization Slurry

作　　者：余晨月 左杰 付志浩 连洲洋 魏无际 YU Chenyue;ZUO Jie;FU Zhihao;LIAN Zhouyang;WEI Wuji(School of Environmental Science and Engineering,Nanjing Tech University,Nanjing 211816,China)

机构地区：[1]南京工业大学环境科学与工程学院,南京211816

出　　处：《腐蚀与防护》2022年第8期28-31,102,共5页Corrosion & Protection

基　　金：国家自然科学基金(21676144)。

摘　　要：构建了氨法脱硫浆液中304不锈钢局部腐蚀发展的闭塞电池模型。通过综合闭塞区离子迁移量、溶液pH和内电极腐蚀速率等对模型中模拟锈层的关键因素进行优选,最终确定最优模拟锈层。结果表明:最优模拟锈层是以滤纸为载体,以混氧化铁与硫酸钙质量比9∶1的混合物为负载物,以0.5%(质量分数)的琼脂溶液为固定成型剂,采用该锈层的闭塞电池模型可较好地模拟局部腐蚀发展过程。An occluded cell model of localized corrosion of 304 stainless steel was constructed in ammonia desulphurization slurry. The key factors of simulated rust layer in the model were optimized through the amount of ion migration in the occluded area, the pH of the solution and the corrosion rate of the inner electrode, and finally the optimal simulated rust layer was determined. The results show that the optimal simulated rust layer was based on filter paper as a carrier, a mixture of mixed iron oxide and calcium sulfate with a mass ratio of 9∶1 as a loading material, and a 0.5%(mass fraction) agar solution as a fixed molding agent. The occluded cell model with the optimal simulated rust layer could simulate well the development process of localized corrosion.

关 键 词：局部腐蚀 闭塞电池 304不锈钢 模拟锈层 

分 类 号：TG172[金属学及工艺—金属表面处理]