基于CIM模型的业务链路拓扑展示系统设计  

Design of a business link topology display system based on CIM model

作　　者：杨维 吴佐平 武亚光 王锦志 于喻 YANG Wei;WU Zuoping;WU Yaguang;WANG Jinzhi;YU Yu(State Grid Customer Service Centre,Tianjin 300300,China;Beijing China-Power Information Technology Co.,Ltd.,Beijing 100085,China;State Grid Corporation of China,BeiJing 100031,China)

机构地区：[1]国家电网有限公司客户服务中心,天津300300 [2]北京中电普华信息技术有限公司,北京100085 [3]国家电网有限公司,北京100031

出　　处：《电子设计工程》2022年第20期117-120,127,共5页Electronic Design Engineering

摘　　要：传统的业务链路拓扑展示系统采集数据耗时过长,导致展示量较低。为了解决上述问题,基于CIM模型研究了一种新的业务链路拓扑展示系统。系统硬件重点设计了转换器、采集器、微处理器和存储器,转换器的芯片选用SD公司生产的SDC2863转换芯片,有效提高了转换速率,应用16位嵌入式结构设计微处理器,提高系统的处理性能。通过打开业务链路拓扑页面、确定拓扑类型、接收请求信息和拓扑数据加载来完成软件工作。实验结果表明,基于CIM模型的业务链路拓扑展示系统能够有效减少采集数据消耗的时间,增加展示数据量。Traditional service link topology display system takes too long to collect data,which leads to low display volume.In order to solve the above problems,a new service link topology display system is studied based on CIM model.The hardware of the system focuses on the design of converter,collector,microprocessor and memory.The chip of the converter is SDC2863 chip produced by SD Company,which can effectively improve the conversion rate.The 16 bit embedded structure is used to design the microprocessor,and the processing performance of the system can be improved.The software work is completed by opening the business link topology page,determining the topology type,receiving request information and loading topology data.The experimental results show that the network topology display system based on CIM model can reduce the time of data acquisition and increase the amount of display data.

关 键 词：CIM模型 业务链路 拓扑展示 展示系统 

分 类 号：TN391[电子电信—物理电子学]