钢丝绳开环永磁磁化漏磁检测传感器探靴槽的仿真优化  

Simulation and optimization of probe shoe groove in open loop permanent magnet magnetic flux leakage detection sensor for steel wire rope

作　　者：贾博涵 张来明 姜宵园 孙燕华[3] JIA Bohan;ZHANG Laiming;JIANG Xiaoyuan;SUN Yanhua(Department of Mechanical Engineering,University of Sheffield,Sheffield S13JD,United Kingdom;China Special Equipemnt Inspection&Research Institute,Beijing 100029,China;School of Mechanical Science and Engineering,Huazhong University of Science and Technology,Wuhan 430074,China)

机构地区：[1]谢菲尔德大学机械系,谢菲尔德S13JD [2]中国特种设备检测研究院,北京100029 [3]华中科技大学机械科学与工程学院,武汉430074

出　　处：《无损检测》2022年第8期20-24,共5页Nondestructive Testing

摘　　要：钢丝绳开环永磁磁化漏磁检测传感器以优异的检测性能被广泛应用于钢丝绳的缺陷检测中。在分析开环永磁磁化漏磁检测传感器原理及开环磁化器结构的基础上,采用ANSYS有限元仿真分析方法,建立了开环永磁磁化器及其探靴槽的有限元模型,提取并分析了在不同探靴槽宽度及探靴槽深度下的钢丝绳缺陷特征曲线,揭示了不同探靴槽尺寸对应的检测结果。结果表明,探靴槽的尺寸对于检测结果有一定影响,存在一个最佳尺寸,在此尺寸下探靴的检测效果最佳。The open-loop permanent magnetic flux leakage detection sensor of steel wire rope is widely used in steel wire rope defect detection in advantage of its excellent detection performance. Based on the principle of open-loop permanent magnet magnetization magnetic flux leakage detection sensor and the structural analysis of open-loop magnetizer, the finite element model of open-loop permanent magnet magnetizer and its probe shoe was established by using ANSYS finite element simulation analysis method, and the defect characteristic curve of steel wire rope under different width and depth of probe shoe was extracted and analyzed. Different detection results corresponding to different probe shoe groove sizes were revealed. The results illustrate that the size of the groove has a certain influence on the detection results, and it is considered that there is an optimal size under which the detection results of the shoe reach an optimal value.

关 键 词：钢丝绳 漏磁检测 开环永磁磁化 传感器 有限元 

分 类 号：TG115.28[金属学及工艺—物理冶金]