高炉粉尘还原提锌的热力学分析与试验研究  

Thermodynamic Analysis and Experimental Study on Zinc Extraction by Reduction ofBlast Furnace Dust

作　　者：杨陶 高鹏 刘崇 解成成 刘纲 张剑 YANG Tao;GAO Peng;LIU Chong;XIE Chengcheng;LIU Gang;ZHANG Jian(Ironmaking Plant of Ma'anshan Iron and Steel Co.,Ltd.,Ma'anshan 243011,China;HBIS Material Technology Research Institute,Shijiazhuang 050023,China;National Information Research Center of Tsinghua University,Beijing 100083,China;Jiangyin Xingcheng Special Steel Works Co.,Ltd.,Wuxi 214429,China;HBIS Chengde Vanadium and Titanium New Material Co.,Ltd.,Chengde 067102,China)

机构地区：[1]马钢股份公司炼铁总厂,安徽马鞍山243011 [2]河钢材料技术研究院,河北石家庄050023 [3]清华大学信息国家研究中心,北京100084 [4]江阴兴澄特种钢铁有限公司,江苏无锡214429 [5]河钢承德钒钛新材料有限公司,河北承德067102

出　　处：《山东冶金》2022年第5期40-43,共4页Shandong Metallurgy

摘　　要：为充分利用高炉粉尘中的Fe、C等有价资源,对高炉粉尘还原提锌过程进行了热力学计算与分析,并以烧结除尘灰、高炉重力灰和高炉布袋灰为主要原料进行还原提锌试验。结果表明,随还原温度的升高或配碳量的增加,球团的金属化率和脱锌率均呈现增加的趋势。为得到最佳的金属化率、脱锌率,应控制球团的还原温度为1200℃、碳氧摩尔比为1.40。In order to make full use of Fe,C and other valuable resources in blast furnace dust,the thermodynamic calculation and analysis of the reduction process of extracting zinc from blast furnace dust were carried out,and the reduction experiments of extracting zinc from sintering dust,blast furnace gravity dust and blast furnace bag dust were carried out.The results show that the metallization rate and dezincification rate of pellets increase with the increase of reduction temperature or carbon content.In order to obtain the best metallization rate and dezincification rate,the reduction temperature of pellets should be controlled at 1200℃and the molar ratio of carbon to oxygen should be 1.40.

关 键 词：高炉粉尘 热力学计算 还原提锌 金属化率 脱锌率 

分 类 号：X757[环境科学与工程—环境工程]