基于NSGA-Ⅱ算法的核反应堆功率LQG控制器设计  

Design of LQG Controller for Nuclear Reactor Power Based on NSGA-ⅡAlgorithm

作　　者：金鑫 李东原 秦戈 徐教珅 唐辉 王鑫 JIN Xin;LI Dongyuan;QIN Ge;XU Jiaoshen;TANG Hui;WANG Xin(State Key Laboratory of Nuclear Power Safety Monitoring Technology and Equipment,China Nuclear Power Engineering Co.,Ltd.,Shenzhen 518172,China)

机构地区：[1]中广核工程有限公司核电安全监控技术与装备国家重点实验室,广东深圳518172

出　　处：《原子能科学技术》2022年第10期2085-2095,共11页Atomic Energy Science and Technology

摘　　要：反应堆功率控制系统的设计与核电厂的安全性和经济性息息相关。为提高其功率控制性能,本研究以某压水堆核电厂为研究对象,建立了其非线性动态数学模型,推导了其状态空间模型;采用线性二次型高斯(LQG)最优控制方法,设计了堆芯功率控制器;进一步基于遗传算法NSGA-Ⅱ对LQR权重系数进行了多目标优化;将本文所设计的控制器与传统PID控制器进行了典型工况的仿真对比。结果表明,与传统PID控制器相比,基于NSGA-Ⅱ方法优化的LQG控制器不但响应快速、控制精度高、稳定性好,而且具有良好的鲁棒性,能获得更优越的堆芯功率控制效果。The design of reactor power control system is closely related to the safety and economy of nuclear power plants.To improve its power control performance,a linear quadratic gaussian(LQG)controller for core power control was designed and optimized in a pressurized water reactor nuclear power plant in this study.Firstly,a nonlinear dynamic model of the reactor core was established through mechanism modeling,which consisted of the point kinetics neutron equation,the thermal dynamics equation and the reactivity equation.The reactivity equation ignores the iodine-xenon effect and considers the reactivity introduced by the control rod,the fuel Doppler effect and the coolant average temperature reactivity feedback.The nonlinear dynamic mathematical model was then linearized based on perturbation theory,and its state space model and transfer function were derived.Secondly,the LQG optimal control method was used to design the core power controller.Since the selection of the linear quadratic regulator(LQR)weight coefficients of the controller is subjective and requires high experience of the designer,and the selection efficiency is low,the optimal weight values are not always selected,while the non-dominated ranking genetic algorithm with elite strategy(NSGA-Ⅱ)has better optimal global search capability.Therefore,in this paper,the NSGA-Ⅱalgorithm was used to optimize the weighting coefficients of LQR.the multi-objective optimization objective function of reactor power and control rod travel was established by using the time multiplied by absolute value integral of error(ITAE)evaluation index,and the multi-objective optimization of LQR weight coefficients of LQG controller was carried out based on NSGA-Ⅱalgorithm.The corresponding Pareto optimal solution set and corresponding LQG controller were obtained.In order to obtain the better reactor power control performance,the LQG controller with the weighting factor corresponding to the point with the smallest power ITAE index was used for core power control.Finally,the LQG

关 键 词：核反应堆功率控制 线性二次型高斯(LQG) NSGA-Ⅱ 参数优化 

分 类 号：TL361[核科学技术—核技术及应用]