红外抗干扰评估序贯均匀试验设计方法研究  

Research on the Sequential Uniform Design Method of Infrared Anti-Jamming Evaluation

作　　者：陈鞭 伍友利[1] 周浩 甘跃鹏 刘同鑫[1] 吴鑫 CHEN Bian;WU Youli;ZHOU Hao;GAN Yuepeng;LIU Tongxin;WU Xin(Aviation Engineering School,Air Force Engineering University,Xi’an 710038,China;Unit 95889,Jiuquan 735018,Gansu,China)

机构地区：[1]空军工程大学航空工程学院,西安710038 [2]95889部队,甘肃酒泉735018

出　　处：《空军工程大学学报》2022年第5期16-21,共6页Journal of Air Force Engineering University

基　　金：国家自然科学基金(61973253)。

摘　　要：为了从全局出发,不断缩小研究范围,高效地进行红外抗干扰评估探索工作,提出采用序贯均匀试验设计方法开展研究。利用该方法设计红外抗干扰评估试验方案,通过数字仿真系统进行试验,在试验研究过程中可以掌握每阶段的详细信息并视情况作出相应调整,直至得到最终满意的试验域和脱靶量。试验结果表明:该方法有效可行,缩小了研究范围,与其他方法的比较也显示出该方法收敛快、效果好等独特优点,为红外抗干扰评估研究提供了一种方法思路。This research is proceeding in all cases from the overall situation to continuously narrow the research scope and efficiently carry out the exploration of infrared anti-jamming evaluation,a sequential uniform experimental design method is proposed to carry out the research.The infrared anti-jamming evaluation test scheme is designed by adopting the method,and the test is carried out by the digital simulation system.In the process of experimental research,the detailed information of each stage can be mastered and adjusted appropriately according to the situation,until the final satisfactory test area and miss distance are obtained.The results show that the method is effective and feasible,and the research scope is gradually reduced.Compared with the other methods,this method is unique in advantages,fast on convergence,and good in effect,and provides a method for the study of infrared anti-jamming evaluation.

关 键 词：红外抗干扰评估 序贯均匀试验设计 试验域 

分 类 号：TJ760.1[兵器科学与技术—武器系统与运用工程]