正交法/响应面法四点接触桃形沟球轴承参数优化  

The parameters of four-point contact peach groove ball bearing are simulated and redesigned by orthogonal experiment method and response surface method

作　　者：高福生[1] 贾瑞超 姜淑凤[1,3] 闫朝竣 王俊峰 GAO Fusheng;JIA Ruichao;JIANG Shufeng;YAN Chaojun;WANG Junfeng(School of Mechanics and Electronics Engineering,Qiqihar University,Qiqihar 161001,CHN;Qiqihar Heavy CNC Equipment Co.,Ltd.,Qiqihar 161005,CHN;Heilongjiang Province Collaborative Innovation Center for Intelligent Manufacturing Equipment Industrialization,Qiqihar 161001,CHN)

机构地区：[1]齐齐哈尔大学机电工程学院,黑龙江齐齐哈尔161001 [2]齐重数控装备股份有限公司,黑龙江齐齐哈尔161005 [3]黑龙江省智能制造装备产业化协同创新中心,黑龙江齐齐哈尔161001

出　　处：《制造技术与机床》2022年第11期163-168,共6页Manufacturing Technology & Machine Tool

基　　金：黑龙江省省属高校基本科研业务费智能机床研究院专项项目(135409606)。

摘　　要：为研究四点接触型桃形沟球轴承寿命提升问题,以某车床伺服电机中的四点接触球轴承为原始研究模型,以滚子数量、滚子直径、垫片角及轴承游隙为影响因素,以轴承基本额定寿命为目标函数,利于基于正交实验法和响应面法对四点接触球轴承结构参数与寿命延长建立关系,得到载荷F值的大小及等高线图进行判断。结果表明:增加滚子数量与增加滚子直径有利于提升轴承使用寿命;增加垫片角数值可以使轴承寿命先增加后减少再增加;增加轴承游隙使轴承寿命先增加后趋于平稳。该研究方法可使垫片角和轴承游隙对提升轴承使用寿命的影响复杂规律得到线性表达,优化后四点接触球轴承使用寿命提升了54.33%,为该类轴承优化设计提出新的设计思路。According to the needs of the four-point contact peach groove ball bearing life improvement problem,taking the four-point contact ball bearing in a lathe servo motor as the original research model,taking the number of rollers,roller diameter,gasket angle and bearing clearance as the influencing factors,and taking the basic rating life of the bearing as the target function,it is conducive to the optimization design and analysis of the structural parameters of the four-point contact ball bearing based on the orthogonal experimental method and the response surface method,and the size of the load F value and the contour diagram are obtained to judge.The results show that increasing the number of rollers and increasing the diameter of the rollers are conducive to improving the service life of the bearing.Increasing the value of the gasket angle can increase the bearing life first,then decrease and then increase;Increasing the bearing clearance increases the bearing life first and then tends to be stable.This research method can make the influence of gasket angle and bearing clearance on the improvement of bearing service life be expressed linearly,and the service life of the four-point contact ball bearing after optimization is increased by 54.33%,which can improve the new design idea for the optimal design of this type of bearing.

关 键 词：四点接触球轴承 正交实验法 响应面法 轴承寿命 优化参数数据对比 

分 类 号：TH133.33[机械工程—机械制造及自动化]