基于刮刀磨损下的生活用纸纹路研究及质量评估  

Study and Quality Assessment of the Tissue Paper Crepes Based on Doctor Blade Wear

作　　者：陈汉秋 杨淑娟 梁福根 肖鹏 钱进 杨飞 张勇[1] CHEN Hanqiu;YANG Shujuan;LIANG Fugen;XIAO Peng;QIAN Jin;YANG Fei;ZHANG Yong(School of Materials Science and Engineering,Zhejiang Sci-Tech University,Hangzhou,Zhejiang Province,310018;Company Limited of Zhejiang Transfar Whyyon Chemical,Hangzhou,Zhejiang Province,311231;Company Limited of Zhejiang Yubo New Material,Taizhou,Zhejiang Province,318000)

机构地区：[1]浙江理工大学材料科学与工程学院,浙江杭州310018 [2]浙江传化华洋化工有限公司,浙江杭州311231 [3]浙江宇博新材料有限公司,浙江台州318000

出　　处：《中国造纸》2022年第10期110-117,共8页China Pulp & Paper

基　　金：浙江省重点研发计划项目(2020C04015,2021C03160);浙江理工大学科研启动基金(11153132612101)。

摘　　要：在其他生产工艺参数不变的情况下,探索生活用纸纸张纹路随起皱刮刀磨损对手感(HF)值的影响。通过3D显微镜的拼接功能获得纸张微观图像,分析其表面形貌,量化皱纹的高度、宽度和长度,并计算出样品的单位长度和每平方厘米皱纹数。另外,利用柔软度测试仪(TSA)分析了生活用纸的宏观表面特性。结果表明,HF值随皱纹宽度、高度的增加而降低;单位长度和每平方厘米皱纹数越多,手感值越好。Under the other condition of constant production process parameters of tissue paper,the influence of the tissue paper crepes on the hand feel(HF)values with the wear of doctor blade was explored.The microscopic images of tissue paper were obtained by the 3D microscope stitching function to analyze the surface appearance of it,quantify the height,width and length of the crepes and calculate the quantity of crepes per centimeter and square centimeter.In addition,the Tissue Softness Analyzer(TSA)was used to characterize the macroscopic surface of tissue.The results showed that the HF values decreased with the increasing of the width and height of the crepes,the larger amount of crepes per centimeter and square centimeter,the better the HF value.

关 键 词：生活用纸 起皱刮刀 3D显微镜 纹路 手感值 

分 类 号：TS761.6[轻工技术与工程—制浆造纸工程]