利用发热废钢提高转炉废钢比工艺实践  

Process Practice of Increasing Converter Scrap Ratio by Using Hot Scrap

作　　者：刘林 张德荣 任涛[1] 胡正祥 周伟 陈洪民[1] Liu Lin;Zhang Derong;Ren Tao;Hu Zhengxiang;Zhou Wei;Chen Hongmin(Rizhao Steel Holding Group Co.,Ltd.,Rizhao Shandong 276800)

机构地区：[1]日照钢铁控股集团有限公司,山东日照276800

出　　处：《山西冶金》2022年第6期97-99,共3页Shanxi Metallurgy

摘　　要：废钢比是转炉生产的重要经济技术指标,其值大小直接影响转炉冶炼热平衡,提高入炉废钢比是实现节铁增钢、降本增效的重要技术手段。然而因低温低硅铁水的影响,通过优化渣量、添加提温剂等措施,不能继续提高废钢比。为此,日钢基于低温低硅铁水的现状,加入发热废钢,使入炉废钢单耗由245 kg/t提高至252 kg/t,并通过优化发热废钢配比及转炉操作,克服发热废钢对终点成分的影响。发热废钢效果较为明显,为实现节铁增钢、降本增效奠定了一定基础。The scrap ratio is an important economic and technical index of converter production,and its value directly affects the heat balance of converter smelting.Increasing the scrap ratio is an important technical means to realize iron saving,steel increasing,cost reducing and efficiency increasing.However,due to the influence of low temperature and low silicon hot metal,the scrap ratio can not be further improved by optimizing slag amount and adding temperature increasing agent.Based on the current situation of low-temperature and low silicon hot metal,heating scrap is added to increase the unit consumption of incoming scrap from 245 kg/t to 252 kg/t,and the influence of heating scrap on the end-point composition is overcome by optimizing the ratio of heating scrap and converter operation.The effect of heating scrap is obvious,which lays a certain foundation for realizing iron saving,steel increasing,cost reducing and efficiency increasing.

关 键 词：转炉 低温低硅铁水 废钢比 发热废钢 

分 类 号：TF702.3[冶金工程—钢铁冶金]