Prediction and Analysis of the Force and Shape Parameters in Variable Gauge Rolling  

作　　者：Yuanming Liu Zhenhua Wang Tao Wang Jie Sun Xianguang Zheng Dianhua Zhang Qingxue Huang 

机构地区：[1]College of Mechanical and Vehicle Engineering,Taiyuan University of Technology,Taiyuan 030024,China [2]Engineering Research Center of Advanced Metal Composites Forming Technology and Equipment,Ministry of Education,Taiyuan 030024,China [3]TYUT-UOW Joint Research Center,Taiyuan University of Technology,Taiyuan 030024,China [4]State Key Laboratory of Rolling and Automation,Northeastern University,Shenyang 110819,China

出　　处：《Chinese Journal of Mechanical Engineering》2022年第4期79-92,共14页中国机械工程学报（英文版）

基　　金：Supported by National Natural Science Foundation of China(Grant Nos.51904206,52105390,51974196,51805359);Open Research Fund from the State Key Laboratory of Rolling and Automation,Northeastern University(Grant No.2020RALKFKT011);Shanxi Province Science and Technology Major Projects(Grant No.20181102015);China Postdoctoral Science Foundation(Grant No.2020M670705).

摘　　要：Variable gauge rolling is a new process to obtain a plate for which the thickness changes continuously by continuously and dynamically adjusting the roll gap upward and downward in the rolling process.This technology is an efective method for producing lightweight,low-cost,and economical plates.However,variable gauge rolling is an unsteady process,and the changes in the force and deformation parameters are complex.In this research,based on the minimum energy theory of the variational principle and considering the characteristics of the roll movement and workpiece deformation comprehensively,the internal plastic deformation,friction,shear and tension powers,and the minimum result of the total power functional in upward and downward rolling are obtained with the frst integral and then with a variation of adopting the specifc plastic power and strain rate vector inner product.The analytical results of the deformation and force parameters are also established using the variational method.Then the precision of this model is certifed using the measured values in a medium plate hot rolling plant and the experimental data for Tailor Rolled Blank rolling.Good agreement is found.Additionally,the variation rule of bite angle,neutral angle,and location neutral points are shown,and the change mechanism of the friction parameter on the stress state efect coefcient is given in variable gauge rolling.This research proposes a new mathematical model for rolling process control that provides a scientifc basis and technical support for obtaining an accurate section shape in variable gauge rolling production.

关 键 词：Variable gauge rolling Analytical solution Roll separating force Energy method Neutral point 

分 类 号：TG335[金属学及工艺—金属压力加工]