蒸汽发生器全尺寸汽水分离装置模型开发  

Development of Model of Full-scale Separation System for Steam Generator

作　　者：曾春杰 王明军[1] 田文喜[1] 秋穗正[1] 苏光辉[1] ZENG Chunjie;WANG Mingjun;TIAN Wenxi;QIU Suizheng;SU Guanghui(School of Nuclear Science and Technology,Xi’an Jiaotong University,Xi’an 710049,China)

机构地区：[1]西安交通大学核科学与技术学院,陕西西安710049

出　　处：《原子能科学技术》2022年第11期2253-2261,共9页Atomic Energy Science and Technology

摘　　要：汽水分离装置是核动力系统蒸汽发生器(SG)重要组成部分。目前针对汽水分离装置的研究包含试验与模拟两种方法,受限于成本和计算资源,现有研究主要是对汽水分离装置中单一旋叶式分离器或波形板干燥器开展。但在SG不同位置处分离器或干燥器入口参数不相同,存在负荷不均问题。为此,本研究基于已有分离器和干燥器分离效率计算模型,对汽水分离装置适当简化,开发SG全尺寸汽水分离装置模型。研究SG中不同位置处分离器和干燥器分离效率分布特性以及干燥器液滴负荷不均情况。计算结果可为SG汽水分离装置设计提供参考,开发的汽水分离模型已植入自主化SG全流域热工水力计算分析程序STAF。The separation system is an important part of the nuclear steam generator(SG),which is essential for the safe operation of the steam turbine in the nuclear power system.At present,the research on separation system includes experiment and simulation studies.Limited by the cost and computational resources,the existing research is mainly carried out on a single swirl vane separator or corrugated plate dryer in the SG separation system.However,the inlet velocity,void fraction etc.parameters of the separators or dryers are not the same at different locations in the SG,the distribution of separation efficiency and uneven loading in each separator or dryer can’t be obtained,which is not conducive to the integral separation characteristics study.To this end,a SG full-scale separation system model was developed,and the swirl vane separators were simplified as tubes.The calculation of droplet separation process was based on the existing separation model,and the pressure drop was calculated by an additional momentum source item.The corrugated plate dryers were simplified based on porous media model,the pressure drop of dryers was simulated by the resistance model of porous media,and the existing droplet separation model of corrugated plate dryer was used to calculate the separation efficiency.The outlet parameters of STAF program(a SG three-dimensional thermal hydraulic analysis program)were used as the inlet parameters of the SG full-scale separation system model.The distribution of the separation efficiency of the swirl vane separators and corrugated plate dryers was studied.Results show that droplets entering the SG hot side separation device(including swirl vane separator and corrugated plate dryer)have a higher flow rate,which leads to large momentum difference between steam and droplets,the higher momentum facilitates droplet separation,and the hot-side separation device has higher separation efficiency.The separation efficiency of all swirl vane separators ranges from 81.611%to 99.999%,while the corrugated plate dr

关 键 词：蒸汽发生器 旋叶式汽水分离器 波形板干燥器 分离效率 多孔介质 

分 类 号：TL333[核科学技术—核技术及应用]