动磁式直线压缩机研究进展及其关键技术分析  被引量:1

Research Status and Key Technology Analysis of Moving Magnetic Linear Compressor

在线阅读下载全文

作  者:张龚圣 张华[1] 尤晓宽 张鑫 ZHANG Gongsheng;ZHANG Hua;YOU Xiaokuan;ZHANG Xin(School of Energy and Power Engineering,University of Shanghai for Sciences and Technology,Shanghai 200093,China)

机构地区:[1]上海理工大学能源与动力工程学院,上海200093

出  处:《制冷技术》2022年第4期80-85,共6页Chinese Journal of Refrigeration Technology

基  金:国家自然科学基金(No.51176124)。

摘  要:本文对国内外文献进行调研,研究了动磁式直线压缩机的原理、结构和特点,从支撑系统、控制系统、压缩机效率和减振降噪4个方面对压缩机的影响进行深入探讨。结果表明:铍铜UNS C 17200(TH02)的刚度值最大,为179.20 N/m,更适合应用于挠性轴承;可通过减小间隙容积提高制冷量,当压力比为2.5,行程为13 mm时,间隙从1.07 mm减小到0.4 mm,冷却能力可增加12%。The principle,structure and characteristics of the moving magnetic linear compressor by investigating the domestic and foreign literature are studied in this paper.The influence of the support system,control system,compressor efficiency and vibration and noise reduction on the compressor is discussed in depth.The results show that the stiffness of beryllium copper UNS C17200(TH02)is 179.20 N/m,which is more suitable for flexible bearings.The cooling capacity can be increased by reducing the clearance volume.When the pressure ratio is 2.5 and the stroke is 13 mm,the clearance decreases from 1.07 mm to 0.4 mm,and the cooling capacity increases by 12%.

关 键 词:压缩机 直线电机 支撑系统 效率 

分 类 号:TQ051.5[化学工程] TK173[动力工程及工程热物理—热能工程]

 

参考文献:

正在载入数据...

 

二级参考文献:

正在载入数据...

 

耦合文献:

正在载入数据...

 

引证文献:

正在载入数据...

 

二级引证文献:

正在载入数据...

 

同被引文献:

正在载入数据...

 

相关期刊文献:

正在载入数据...

相关的主题
相关的作者对象
相关的机构对象