YGMK系列伺服门式液压机设计  

Design of YGMK series servo entire frame hydraulic press

作　　者：姜君杰 乔礼惠[1] JIANG Junjie;QIAO Lihui(Jiangsu Guoli Forging Machine Tool Co.,Ltd.,Yangzhou 225009,Jiangsu China)

机构地区：[1]江苏国力锻压机床有限公司,江苏扬州225009

出　　处：《锻压装备与制造技术》2022年第5期36-41,共6页China Metalforming Equipment & Manufacturing Technology

摘　　要：伺服门式液压机机身采用优质材料经成形、焊接形成整体框架结构,滑块导向采用四角八面导轨,使机床精度保持性好、导向精度高、抗偏载能力强。汇川IS580控制ESMG1交流永磁同步电机驱动齿轮泵,结合位移、压力传感器信号,由控制系统集中运算处理,配以先进的液压插装阀系统,实现精确控制的同时也能满足节能、降噪环保要求。安全性方面,机床配置有必要的安全防护措施,通过硬件和软件结合的方式双重确保操作人员和设备的安全。The servo entire frame hydraulic press body is welded with high-quality materials and sheet metal forming technology to form an integral frame structure,and the slider is guided by a four corner eight side guide rail,which makes the machine tool have good accuracy retention,high guidance accuracy,and strong anti-eccentric load capacity.Inovance IS580 controls ESMG1 AC permanent magnet synchronous motor to drive the gear pump.In combination with displacement and pressure sensor signals,it is centrally calculated and processed by the control system,an advanced hydraulic cartridge valve system has been equipped to achieve accurate control and meet the requirements of energy conservation,noise reduction and environmental protection.In terms of safety,the machine tool is equipped with necessary safety protection measures to ensure the safety of operators and equipment through the combination of hardware and software.

关 键 词：液压机 控制系统 驱动器 液压原理 安全措施 

分 类 号：TG315.4[金属学及工艺—金属压力加工]