检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:要如磊 翟现明 王小建 杨波 秦剑坤 刘栩瑞 游然 Yao Rulei;Zhai Xianming;Wang Xiaojian;Yang Bo;Qin Jiankun;Liu Xurui;You Ran(Shanxi Academy of Building Research Co.,Ltd.,Taiyuan,Shanxi 030001,China;Shanxi Yangtai Environmental Protection Technology Service Co.,Ltd.,Yangquan,Shanxi 045000,China;Huayang New Material Technology Group Co.,Ltd.,Yangquan,Shanxi 045000,China;Yangmei Group Nagu(Shanxi)Aerogel Science and Technology Innovation City Management Co.,Ltd.,Yangquan,Shanxi 045000,China)
机构地区:[1]山西省建筑科学研究院有限公司,山西太原030001 [2]山西阳泰环保技术服务有限公司,山西阳泉045000 [3]华阳新材料科技集团有限公司,山西阳泉045000 [4]阳煤集团纳谷(山西)气凝胶科创城管理有限责任公司,山西阳泉045000
出 处:《涂料工业》2022年第10期24-29,37,共7页Paint & Coatings Industry
摘 要:为了提高水性膨胀型钢结构防火涂料的耐火性能,探究了水性成膜物质和各原料用量对耐火性能的影响。以低活性端氨基聚醚为关键原料,合成了非离子型水性聚脲,并以合成的水性聚脲为成膜物质制备了水性聚脲基膨胀型钢结构防火涂料。采用《超薄型钢结构防火涂料防火性能快速测试方法》对小试配方进行快速筛选,考察了水性聚脲、钛白粉和陶瓷纤维的添加量对其耐火性能的影响。结果表明:以水性聚脲B为成膜物质,当水性聚脲添加量20%、钛白粉添加量16%、陶瓷纤维添加量1.0%时,制备得到的膨胀型钢结构防火涂料耐火性能最佳。对优选配方按照GB 14907—2018《钢结构防火涂料》进行耐火性能测试,耐火性能为1.27 h/1.43 mm、1.68 h/2.05 mm和2.02 h/2.79 mm,耐火性能较高。In order to improve the fire resistance of water−based intumescent fireproof coatings for steel structures,the effects of the types of water−based film−forming substances and the amount of each raw material on the fire resistance were explored in this paper.The non−ionic water−based polyurea was synthesized by using low−activity amino terminated polyether as the key raw material.And the waterborne polyurea−based intumescent fire retardant coatings for steel structure was prepared by using the synthetic waterborne polyurea as film−forming substance.The“Rapid Test Method for Fire Resistance of Ultra−thin Steel Structure Fire Retardant Coatings”was used to quickly screen the small test formulations,and the effects of the additions of water−based polyurea,titanium dioxide and ceramic fiber on their fire resistance were investigated.The results showed that when the water−based polyurea B was used as the film−forming material,the water−based polyurea addition amount was 20%,the titanium dioxide addition amount was 16%,and the ceramic fiber addition amount was 1.0%,the prepared intumescent fireproof coatings for steel structure had the best fire resistance.The fire resistance of the optimized formula was tested according to GB 14907—2018 Fire Retardant Coatings for Steel Structure.The fire resistance was 1.27 h/1.43 mm,1.68 h/2.05 mm and 2.02 h/2.79 mm,which showed high fire resistance.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:3.144.232.164