某前顶盖外板修冲工序废料排出不良的改进  

Improvement of waste discharge in trimming and stamping process of front head cover outer plate

作　　者：冯凯 张斌 张德良 孙绪强 窦晓亮 FENG Kai;ZHANG Bin;ZHANG De-lang;SUN Xu-qiang;DOU Xiao-liang(Shandong Weifang Futian Mould Co.,Ltd.,Weifang,Shangdong 261200,China)

机构地区：[1]山东潍坊福田模具有限责任公司,山东潍坊261200

出　　处：《模具工业》2022年第11期32-36,共5页Die & Mould Industry

摘　　要：修冲工序的废料下滑是影响模具自动化生产的一项因素,因废料不能顺利排出导致生产线停工,甚至造成模具损坏,影响机床开工率及生产节拍。为了保证模具在生产线上能顺利生产,废料下滑不畅问题须在模具验收阶段解决,实现废料排出无障碍,为顾客提供满意的模具。The waste sliding in trimming and stamping process is a factor that affects the automatic production of the die,because the waste could not be discharged smoothly,the production line would be shut down,even the die would be damaged,and the operation rate and production rhythm of the machine tool would be affected.In order to ensure that the die could smoothly produced in the production line,the problem cause of the waste poor sliding was solved in the acceptance stage of the die,which realized the waste discharge without obstacle and provided customers with satisfactory die.

关 键 词：废料下滑 自动化生产线 刃带高度 冲裁入模量 

分 类 号：TG385.2[金属学及工艺—金属压力加工]