9.00R20NHS井下矿用光面全钢工程机械子午线轮胎的设计  

Design on 9.00R20NHS Smooth Off-The-Road Radial Tire for Underground Mining

作　　者：宋朝兴 李晓明 陈宇 王若飞[1] 周亚兵 SONG Chaoxing;LI Xiaoming;CHEN Yu;WANG Ruofei;ZHOU Yabing(Aeolus Tyre Co.,Ltd,Jiaozuo 454003,China)

机构地区：[1]风神轮胎股份有限公司,河南焦作454003

出　　处：《橡胶科技》2022年第11期556-559,共4页Rubber Science and Technology

摘　　要：介绍9.00R20NHS井下矿用光面全钢工程机械子午线轮胎的设计。结构设计:外直径1050 mm,断面宽255 mm,行驶面宽度230 mm,行驶面弧度高10 mm,胎圈着合直径510 mm,胎圈着合宽度184 mm,断面水平轴位置(H_(1)/H_(2))0.753,胎面采用光面花纹,花纹深度51 mm,胎肩增加测深沟标识设计。施工设计:胎面采用三层结构,胎体采用0.25+6+12×0.225HT钢丝帘线,1#带束层采用3+9+15×0.175+0.15HT钢丝帘线,2#和3#带束层采用3+9+15×0.22+0.15HT钢丝帘线,4#带束层采用3×7×0.20HE钢丝帘线,采用一次法两鼓成型机成型,采用双模热板式硫化机硫化。成品性能试验结果表明,成品轮胎的充气外缘尺寸和物理性能均达到国家标准及相应设计要求。Design of 9.00R20NHS smooth off-the-road radial tire for underground mining was introduced.In the structure design,the following parameters were taken:overall diameter 1050 mm,crosssection width 255 mm,width of running surface 230 mm,arc height of running surface 10 mm,bead diameter at rim seat 510 mm,bead width at rim seat 184 mm,maximum width position of cross section(H_(1)/H_(2))0.753,using smooth pattern for the tread,pattern depth 51 mm,and adding groove depth measuring design on the tire shoulder.In the construction design,the following processes were taken:using three-layer structure for the tread,using 0.25+6+12×0.225HT steel cord for the carcass,3+9+15×0.175+0.15HT steel cord for 1#belt,3+9+15×0.22+0.15HT steel cord for 2#and 3#belts,3×7×0.20HE steel cord for 4#belt,using one-stage two-drum building machine to build the tire and dualmode hot plate curing press to cure the tire.The test results of the finished tire showed that the inflation peripheral dimension and physical properties of the finished tire met the requirements of national standard and corresponding design.

关 键 词：井下矿用光面全钢工程机械子午线轮胎 结构设计 施工设计 成品性能 

分 类 号：TQ336.1[化学工程—橡胶工业] U463.341.5[机械工程—车辆工程]