多道次轧制下2205/NI/EH40复合板组织均匀性  

Microstructure uniformity of 2205/NI/EH40 composite plate under multi-pass rolling

作　　者：王宇韩 宜亚丽[1] 冯康康 张钊瑞 金贺荣[2,3] WANG Yu-han;YI Ya-li;FENG Kang-kang;ZHANG Zhao-rui;JIN He-rong(School of Mechanical Engineering,Yanshan University,Qinhuangdao 066004,China;Key Laboratory of Advanced Forging and Stamping Technology and Science of Ministry of National Education,Yanshan University,Qinhuangdao 066004,China;Parallel Robot and Mechatronic System Laboratory of Hebei Province,Yanshan University,Qinhuangdao 066004,China)

机构地区：[1]燕山大学机械工程学院,河北秦皇岛066004 [2]燕山大学先进锻压成型技术与科学教育部重点实验室,河北秦皇岛066004 [3]燕山大学河北省并联机器人与机电系统实验室,河北秦皇岛066004

出　　处：《塑性工程学报》2022年第11期110-119,共10页Journal of Plasticity Engineering

基　　金：中央引导地方科技发展资金资助项目(216Z1003G);河北省自然科学基金-高端钢铁冶金联合基金资助项目(E2020203033)。

摘　　要：为了提升多道次热轧复合板各层间的组织均匀性,基于Deform软件建立了双相不锈钢复合板多道次热轧三维热力耦合模型,在预设工艺下进行了不锈钢复合板的多道次热轧模拟,依据优劣解距离法建立了组织均匀性判定准则并对各工艺下的组织均匀性进行了判定,借助二辊轧机进行了不锈钢复合板的多道次热轧试验,利用光学显微镜对终轧板材的金相组织进行了观测。结果表明,随着轧制过程的进行,各层板材的晶粒尺寸均呈现下降趋势,板材上下表面处的晶粒尺寸差值呈现先增加后减小。得到了维持组织均匀性较优的轧制工艺参数,且试验结果与仿真结果的误差保持在5%以内,有效证明了仿真结果的准确性。To improve the microstructure uniformity between each layer of multi-pass hot rolled composite plate,the 3D thermal mechanical coupling model of multi-pass hot rolling for duplex stainless steel composite plate was established based on Deform software.The multi-pass hot rolling simulation of stainless steel composite plate under preset process was carried out.The judgment criterion of microstructure uniformity was established according to technique for order preference by similarity to an ideal solution(TOPSIS)method,and the microstructure uniformity under each process was judged.The multi-pass hot rolling tests of stainless steel composite plate were carried out by means of two-roller rolling mill,and the metallographic structure of the final rolled plate was observed by optical microscope(OM).The results show that as the rolling process proceeds,the grain size of each layer of the plate presents a decreasing trend,and the grain size difference between the upper and lower surfaces of the plate firstly increases and then decreases.The rolling process parameters to maintain better microstructure uniformity were obtained,and the error between the test results and the simulation results is kept within 5%,which effectively proves the accuracy of the simulation results.

关 键 词：不锈钢复合板 有限元 组织均匀性 优劣解距离法 多道次热轧 

分 类 号：TG335[金属学及工艺—金属压力加工]