基于均匀试验法的干湿铣削B65A-S材料切削力对比分析  

Comparative Analysis of Dry and Wet Milling B65A-S Cutting Force Based on Uniform Test Method

作　　者：邓亚弟[1] 税妍[1] 向志杨 王春江[1] Deng Yadi;Shui Yan;Xiang Zhiyang;Wang Chunjiang(Dongfang Turbine Co.,Ltd.,Deyang,Sichuan 618000,China;不详)

机构地区：[1]东方电气集团东方汽轮机有限公司,四川省德阳市618000

出　　处：《工具技术》2022年第10期114-116,共3页Tool Engineering

基　　金：德阳市产学研合作联合技术攻关项目(2020CKL006)。

摘　　要：以B65A-S材料为研究对象,在干切削和湿切削两种不同铣削工况下,以切削速度、进给量和切削深度为三因素,进行十三水平的均匀试验。实测切削力后,采用回归分析对试验结果进行拟合,得出在试验切削参数范围内的切削力经验模型,并对比分析了干、湿切削时的切削力变化规律。Material B65A-S is taken as the research object,and the uniform test method is used under two different milling conditions of dry cutting and wet cutting,the three factors are cutting speed,feed rate and cutting depth,uniform experiments are carried out at thirteen levels.In this scheme,the experimental results are fitted by regression analysis after the cutting force is measured,and the empirical model of cutting force within the range of experimental cutting parameters is obtained.The variation law of cutting force in dry and wet cutting is compared and analyzed.

关 键 词：切削力 均匀试验法 干切削 湿切削 

分 类 号：TG501.5[金属学及工艺—金属切削加工及机床] TH162[机械工程—机械制造及自动化]