C波段6MeV轴耦合驻波加速管的研制  

Development of C-band 6MeV On-axis Coupled Standing Wave Accelerating Tube

作　　者：杨誉[1] 杨京鹤 余国龙[1] 韩广文[1] 吕约澎 王博 崔爱军 吴青峰[1] 王常强 范雨轩 朱志斌[1] YANG Yu;YANG Jinghe;YU Guolong;HAN Guangwen;LYU Yuepeng;WANG Bo;CUI Aijun;WU Qingfeng;WANG Changqiang;FAN Yuxuan;ZHU Zhibin(Department of Nuclear Technology and Application,China Institute of Atomic Energy,Beijing 102413,China)

机构地区：[1]中国原子能科学研究院核技术综合研究所,北京102413

出　　处：《原子能科学技术》2022年第12期2773-2779,共7页Atomic Energy Science and Technology

基　　金：核能开发项目(BA202212000204)。

摘　　要：为发展紧凑型电子直线加速器,本文研制了一支C波段轴耦合驻波加速管。该加速管包括3个聚束腔单元和9个均匀加速腔单元,总长度约284 mm。根据射频相位聚焦原理进行了初步物理设计,并对整管腔链进行等效电路分析及仿真优化,从而确定了尺寸参数,最后进行了冷测调配及高功率出束实验。基于该流程研发了C波段驻波加速管,其工作频率为5 713.6 MHz,束流能量可达6 MeV,脉冲流强为84.5 mA。In order to develop a compact electron linear accelerator, a C-band on-axis coupled standing wave accelerating tube operating at the frequency of 5 712 MHz was developed in this paper. The designed beam energy is 6 MeV, and the designed pulse beam current intensity is greater than 80 mA. Firstly, in order to achieve the compact goal, the beam dynamics design was carried out based on the RF phase focusing theory. By designing the phase velocity distribution and electric field distribution in the whole tube reasonably, the longitudinal bunching and transverse focusing of the electron beam were realized simultaneously without external focusing magnetic field. Secondly, the structure of this C-band accelerating tube was optimized after establishing the equivalent circuit model to obtain the required electric field distribution. This accelerating tube adopted π/2 mode on-axis coupled standing wave structure and was composed of three bunching cavities and nine uniform accelerating cavities with a total length of about 284 mm. Through the analysis of the equivalent model, the relationship between the cavity parameters and the coupling coefficient between adjacent cavities were revealed. After adjusting the basic parameters of each cavity, the structure of this tube was determined and the required electric field distribution was obtained. Then the input coupler was designed to match the coupling requirement and the RF field got from the simulation of the whole tube was used in the beam dynamics validation calculation. At last, cavities were brazed together after tuned to the designed frequency and the cold test and high-power test of this tube were carried out. The reflection parameters of this tube were tested in the vacuum condition. The test results show that the operating frequency is 5 713.6 MHz, the reflection coefficient at the operating frequency is-16.5 dB, and the corresponding input coupling is 1.35, which meets the designed requirements. The electric field distribution was tested according to the bead-pull m

关 键 词：C波段 驻波加速管 轴耦合 

分 类 号：TL53[核科学技术—核技术及应用]