分布式地震数据采集器的高精度时间同步系统研制  

Design on high-precision time-synchronization system for distributed seismic data acquisition

作　　者：李彩华[1] 滕云田[1] 周健超 胡星星[1] 王喜珍[1] 李小军[2] 王玉石 Li Caihua;Teng Yuntian;Zhou Jianchao;Hu Xingxing;Wang Xizhen;Li Xiaojun;Wang Yushi(Institute of Geophysics,China Earthquake Administration,Beijing 100081,China;Department of Urban Construction,Beijing University of Technology,Beijing 100124,China)

机构地区：[1]中国地震局地球物理研究所,北京100081 [2]北京工业大学城市建设学部,北京100124

出　　处：《地震学报》2022年第6期1111-1120,共10页Acta Seismologica Sinica

基　　金：科技部重点研发计划项目(2019YFC1511000);中国地震局地球物理研究所基本科研业务费(DQJB19B13)联合资助.

摘　　要：为了解决分布式地震数据采集系统的同步授时问题,本文研制了一套高精度时间同步授时系统。该系统在通信过程中周期性地发送同步授时秒脉冲,并通过授时秒脉冲传输实现实时传输延时测量及时间校正,从而实现多通道高精度同步授时。基于此设计原理,采用高速硬件可编程器件研制了同步授时系统,并通过测试证实该系统在2 km通信距离时同步授时精度优于200 ns,表明该同步授时系统稳定、可靠并具有一定实用性。In order to solve the time-synchronization problem of distributed seismic data acquisition system,we designed a new high-precision time-synchronization technical system in this paper.In this system,a synchronous timing pulse was transmitted periodically during data communication.Through transmitting time measurement and its transmission delay time correction of synchronous timing pulse,high-precision multi-channel time synchronization was achieved in this technical system.And a time-synchronization technical system designed with high-speed programed chips was used to carry out the time-synchronous test.The result proves that the synchronous timing accuracy of time-synchronous system is better than 200 ns when the optical fiber is 2 km,which indicates that the time-synchronization system is stable and practical.

关 键 词：时间同步 分布式数据采集 延时测量 时间校正 

分 类 号：TH762.2[机械工程—仪器科学与技术]