基于IPv9的艺术焰火遥控系统设计  

Design of Artistic Fireworks Remote Control System Based on IPv9

作　　者：陶彧 李军[1] 赵义红[1] 张宇[1] 刘硕[1] TAO Yu;LI Jun;ZHAO Yihong;ZHANG Yu;LIU Shuo(Chengdu University of Technology,Chengdu 610067,China)

机构地区：[1]成都理工大学,四川成都610067

出　　处：《通信与信息技术》2022年第S01期57-60,共4页Communication & Information Technology

摘　　要：针对艺术造型焰火燃放时存在数量巨大的焰火品种,按点火先后次序进行高精准控制难,点火人员位置要求严格等问题,提出了一种利用IPv9网络技术将所有焰火点作为一个网络节点,点火人员通过手机WiFi作为遥控工具,在焰火表演现场的任何位置下达点火时间控制指令的设计方案。经由嵌入FPGA芯片的IPv9路由器发布指令,各焰火节点的FPGA从网络识别并接收属于自己的指令后,在指定时间控制产生高压火花完成点火。测试表明该系统可达到精准、可靠、自动点火功能目的,可实现比人工点火更为复杂的艺术焰火燃放效果。Aiming at the problems of huge number of fireworks varieties in artistic modeling fireworks display,the difficulty of high precision time control according to the order of ignition,and the strict requirement of ignition personnel location,a kind of IPv9 network technology is proposed to use all fireworks points as a network node,and the ignition personnel can give the ignition time control command at any location of the fireworks display site through cell phone WiFi as a remote control tool the design solution.After the instructions are issued by the IPv9 router embedded with FPGA chips,the FPGA of each fireworks node identifies and receives its own instructions from the network,and then controls the generation of high-voltage sparks at the specified time to complete the ignition.The test shows that the system can achieve the purpose of accurate,reliable and automatic ignition function,which can realize more complex artistic fireworks display effect than manual ignition.

关 键 词：艺术造型焰火 IPv9 FPGA 

分 类 号：TN91[电子电信—通信与信息系统]