基于蒙特卡洛仿真的营打击点阵参数预测方法  

Prediction Method of Batting Lattice Parameters Based on Monte Carlo Simulation

作　　者：许龙 邵太华 陈洪辉[1] XU Long;SHAO Taihua;CHEN Honghui(Key Laboratory of Information Systems Engineering,National University of Defense Technology,Changsha 410073,China)

机构地区：[1]国防科技大学信息系统工程重点实验室,长沙410073

出　　处：《火力与指挥控制》2022年第10期87-91,共5页Fire Control & Command Control

摘　　要：为减少我军炮兵在预射阶段浪费的炮弹数量,实现对营打击目标区域瞄准点阵参数的预测,在套用经验公式进行计算的基础上,使用蒙特卡洛仿真法对营火炮打击在通道情况下造成毁伤进行仿真实验,仿真得出不同瞄准点阵参数下的饱和毁伤占比。同经验公式计算结果进行对比,结果比对误差在可接受范围之内,实例证明,该模型可以辅助营打击瞄准点阵参数的选择。For reducing the waste of our army artillery in the pre shot phase and the realization of the prediction of aiming lattice parameters in the battling striking area,on the basis of applying empirical formula to calculation,Monte Carlo simulation method is used to make simulation experiment of the damage caused by battlion artillery strike under the condition of channel,the simulation shows the saturation damage proportion under different aiming lattice paramters.Compared with the results calculated by the empirical formula,the results show that the error of alignment is within an acceptable range.The example proves that the model can assist the selection of the aiming lattice parameters of battalion strike.

关 键 词：营打击点阵 蒙特卡洛仿真 饱和毁伤率 参数预测方法 

分 类 号：TJ3[兵器科学与技术—火炮、自动武器与弹药工程]