玉米秸秆翻埋联合整地机整平装置的设计与试验  

Design and Test of Leveling Device of Corn Stalk Burying Combined Ground Preparation Machine

作　　者：王健 张秀花[1] 王景政 张明 弋景刚[1] 张晋国[1] Wang Jian;Zhang Xiuhua;Wang Jingzheng;Zhang Ming;Yi Jinggang;Zhang Jinguo(College of Mechanical and Electrical Engineering,Agricultural University of Hebei,Baoding 071001,China)

机构地区：[1]河北农业大学机电工程学院,河北保定071001

出　　处：《农机化研究》2023年第4期134-138,147,共6页Journal of Agricultural Mechanization Research

基　　金：“十三五”国家重点研发计划项目(2017YFD0300907);河北省科技重大专项(20287201Z)。

摘　　要：平整的种床利于机械播种,又能节水保墒,是保证小麦播种质量的重要条件。为此,根据小麦播种对整地质量的要求,进行了整平部件的设计与分析。旋耕整平装置主要由旋耕机、镇压辊等构成,以旋耕整平装置中关键部件旋耕刀作为模型,采用EDEM离散元仿真方法,研究旋耕刀转速、旋耕整平装置前进速度及刮平板角度对地表平整度的影响。仿真结果表明:旋耕刀转速为310.84r/min、前进速度为1.52m/s、刮平板角度为170°时,地表平整效果最好,平整度为0.3mm。对整平装置进行田间试验,结果表明:地表平整度平均值1.81cm,满足小麦播种前的平整度要求。Flat seed bed is beneficial to mechanical sowing,and can save water and soil moisture,which is an important condition to ensure the quality of wheat sowing.According to the demands of wheat sowing quality of site preparation for the design and analysis of the flattening parts,rotary tillage leveling device mainly consists of rotary cultivator,suppression of roller,key components in the rotary leveling device rotary knife as a model,USES the EDEM discrete element simulation method,the rotary tillage blade speed,rotary tillage leveling device speed and the Angle of scraping plate surface roughness.The simulation results show that the surface leveling effect is the best and the flatness is 0.3mm when the rotary tillage knife rotation speed is 310.84r/min,the forward speed is 1.52m/s,and the scraping angle is 170°.At the same time,field tests were carried out on the leveling device,and the results were as follows:the average surface flatness was 1.81cm,which met the flatness requirements before wheat sowing.

关 键 词：玉米秸秆 整地机 整平机 EDEM 地表平整度 

分 类 号：S222.4[农业科学—农业机械化工程]