利用不同振动加工对FFF薄板动力学特性的影响  

The influence of using different vibration machining on the dynamic characteristics of FFF plates

作　　者：姜世杰[1,2] 孙明宇 战阳 李常有[1] JIANG Shijie;SUN Mingyu;ZHAN Yang;LI Changyou(School of Mechanical Engineering&Automation,Northeastern University,Shenyang 110819,China;Key Laboratory of Dynamics Reliability of Mechanical Equipment,Shenyang 110819,China;Department of Cultural Foundation,Guidaojiaotong Polytechnic Institute,Shenyang 110023,China)

机构地区：[1]东北大学机械工程与自动化学院,沈阳110819 [2]辽宁省机械装备动力学可靠性重点实验室,沈阳110819 [3]辽宁轨道交通职业学院文化基础部,沈阳110023

出　　处：《振动与冲击》2022年第24期287-292,共6页Journal of Vibration and Shock

基　　金：国家自然科学基金(51705068);中央高校基本科研业务(N180703009;N170302001)。

摘　　要：熔丝成型(fused filament fabrication,FFF)是当今使用最为广泛的增材制造技术之一,能够直接生产出几乎任意复杂形状的零部件。利用振动进行FFF加工,并研究了不同振动(不同频率或幅值)对FFF薄板动力学特性的影响规律。首先,将普通FFF设备改装成振动式FFF设备;然后制备了利用不同振动加工的薄板样件,并完成锤击法模态试验,确定了样件的固有特性和振动响应;最后,对比分析试验结果,阐明了利用不同振动加工对FFF薄板动力学特性的影响规律。试验结果表明,利用的振动的频率或幅值增大时,样件的固有频率和振动响应会随之降低,而模态振型保持不变。Fused filament fabrication(FFF)has been one of the most widely used additive manufacturing technologies,it can directly manufacture parts with almost any complex geometry.In this paper,different vibration(with different frequency or amplitude)was used in FFF process,and their influencing rule on the dynamic characteristics of FFF thin plates was studied.Firstly,an ordinary FFF equipment was refitted into a vibrating one.The samples processed with different vibrations were then prepared,and hammering modal tests were performed to confirm their inherent characteristic and vibration response.Finally,the influencing rule of different utilized vibrations on the dynamic characteristic of FFF plates was clarified through the comparison between the experimental results.It is shown that when the frequency or amplitude of the vibration increases,the natural frequency and vibration response of the samples will decrease,while the mode shape will remain unchanged.

关 键 词：熔丝成型 利用振动 模态试验 固有特性 振动响应 

分 类 号：TB122[理学—工程力学]