检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:李常虎 李征征[1] 王群 LI Changhu;LI Zhengzheng;WANG Qun(Northwest Engineering Corporation Limited,Xi’an 710065,Shaanxi,China)
机构地区:[1]中国电建集团西北勘测设计研究院有限公司,陕西西安710065
出 处:《地质力学学报》2022年第6期948-955,共8页Journal of Geomechanics
基 金:中国电建集团西北勘测设计研究院有限公司科技项目(XBY-KJ-2019-19)。
摘 要:连通率是岩体内部结构面发育尺寸及贯通程度的重要指标,决定着岩体的工程力学特性,对边坡、坝基等工程岩体的整体强度和稳定性评价等发挥着至关重要的作用。以西南地区某水电站拱坝建基典型岩体缓倾结构面为研究对象,根据现场岩体实测数据,基于自行开发的裂隙网络模拟程序,采用蒙特卡洛(Monte-Carlo)随机模拟方法对水电站左、右岸岩体不同剪切方向下缓倾结构面的连通率和岩体强度参数开展研究。研究表明:该水电站左、右岸岩体在不同剪切方向上的连通率是不同的,通过不同方向的角度旋转,总体获得的裂隙连通率较低;水电站右岸平洞PD02处缓倾角结构面的裂隙连通率约在27.35%左右,摩擦系数为1.04,黏聚力为0.89 MPa。研究成果可为水电工程建设提供理论参考和借鉴。The connectivity rate plays an essential role in the stability evaluation of engineering rock masses such as slopes and dam foundations.This paper takes the foundation rock mass of an arch dam of a hydropower station in southwest China as the research object.Based on the field-measured data and the self-developed fissure network simulation program,we used the Monte-Carlo stochastic simulation method to calculate the connectivity rate of the gently dipping structural planes and the strength parameters in different shear directions of rock mass on the left and right bank of the hydropower station.The results show that the connectivity rate of the left and right banks of the hydropower station is different in different shear directions,and the overall fissure connectivity rate is low.The fissure connectivity rate of the gently dipping structural planes at PD02 on the right bank is about 27.35%,the friction coefficient is 1.04,and the cohesion is 0.89 MPa.The research results can provide a theoretical reference for this and similar projects.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:13.58.229.23