超轻鞋用发泡橡胶的制备和性能研究  

Preparation and Properties of Foamed Rubber Material for Ultralight Shoes

作　　者：刘显奎 王志雄 丁思恩 姚乃群 孟志磊 卢鑫 庞晓燕 尹岳涛 LIU Xian-kui;WANG Zhi-xiong;DING Si-en;YAO Nai-qun;MENG Zhi-lei;LU Xin;PANG Xiao-yan;YIN Yue-tao(China Leather&Footwear Research Institute Co.Ltd.,Beijing 100015,China;Jiangsu Dunwang Technology Group Co.Ltd.,Rudong 226400,China;Fujian Key Laboratory of Advanced Rubber-plastics Materials,Jinjiang 362200,China)

机构地区：[1]中国皮革制鞋研究院有限公司,北京100015 [2]江苏盾王科技集团有限公司,江苏如东226400 [3]福建省橡塑新材料重点实验室,福建晋江362200

出　　处：《中国皮革》2022年第12期1-6,共6页China Leather

基　　金：2019年江苏省如东“扶海英才”计划项目(2020370113112745)。

摘　　要：对以异戊二烯橡胶/顺丁橡胶(IR/BR)为主料、三元乙丙橡胶/乙烯辛烯共聚物(EPDM/POE)为辅料的发泡橡胶体系进行了系统研究,探究了主辅料配比、橡胶分散剂、发泡控制剂、发泡剂、交联剂和填料等因素对发泡产品性能的影响。在IR/BR用量为70/30的条件下,以EPDM/POE配比为40/60为最佳条件;橡胶分散剂和橡胶发泡控制剂用量对橡胶体系的分散效果和物理性能会产生较大影响;滑石粉用量为40份、BIPB用量6.6份为本试验的最佳使用量。The foaming rubber system with isoprene rubber/butadiene rubber(IR/BR) as the main material and ethylene propylene diene monomer/poly olefin elastomer(EPDM/POE) as the auxiliary material was studied, and the influence of the main and auxiliary material ratio, rubber dispersant, foaming control agent and foaming agent, cross-linking agent and filler on the performance of foaming products were investigated. Under the condition of IR/BR dosage of 70/30, EPDM/POE ratio of 40/60 is the best condition. The amount of rubber dispersant and foaming control agent has great influence on the dispersion effect and physical properties of rubber system. The optimal dosage of talc powder and BIPB are 40 and 6.6 phr respectively.

关 键 词：IR/BR主料 EPDM/POE辅料 发泡橡胶 性能 

分 类 号：TS94[轻工技术与工程—服装设计与工程]