三维六向编织复合材料T型接头拉脱性能试验研究  

Experimental Research on Pull-Off Properties of Three-Dimension Six-Directional Braided Composite T-Joints

作　　者：李泽江 周良道 姚学锋[2] LI Zejiang;ZHOU Liangdao;YAO Xuefeng(COMAC Shanghai Aircraft Design and Research Institute,Shanghai 201210,China;Tsinghua University,Beijing 100084,China)

机构地区：[1]中国商飞上海飞机设计研究院,上海201210 [2]清华大学,北京100084

出　　处：《航空制造技术》2022年第23期110-115,132,共7页Aeronautical Manufacturing Technology

摘　　要：将复合材料三维编织结构优越特性与T型接头整体化需求相结合,采用树脂传递模塑RTM液体成型工艺,设计制造了三维六向编织复合材料T型接头,针对不同的编织角(20°、30°、40°)及不同的纱线束(6k、9k、12k)下的拉脱性能进行试验研究。试验结果表明,在拉脱载荷作用下,编织角对三维六向编织T型接头的拉脱性能影响很大,编织角从20°变为40°时,拉脱载荷提高了53%;而纱线束对三维六向编织T型接头的拉脱性能基本没有影响。纱线从6k变为12k时,仅增加了约8%;拉脱破坏模式均为T型接头的侧板与底板发生分离。研究成果对整体化复合材料结构设计及研制具有重要的试验指导作用。Using good inter-laminar property of three-dimensional braided composite to meet the requirement of the integral T-joints structure,a T-joints structure has been designed and manufactured with using resin transfer liquid composite molding and 3D six-directional braided composites.The pull-off damage property of the T-joints structure has been studied by tests for different braiding angles(20°,30°,40°)and yarns(6k,9k,12k).It has been shown by the tests that the damage type of T-joints structure with 3D six-directional braided composites is the web pulling away from the flange;The T-joints structure pull-off strength increased by 53%when braiding angle changing from 20°to 40°for the same braiding yarns and by 8%when braiding yarns changing from 6k to 12k for the same braiding angle.The research results can be an important experimental guidance for the design and development of integrated composite structure.

关 键 词：三维编织复合材料 T型接头 拉脱性能 编织角 破坏模式 

分 类 号：TB332[一般工业技术—材料科学与工程]