检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:郑峰 张锦松 林燕贞 陈志东 张军 ZHENG Feng;ZHANG Jinsong;LIN Yanzhen;CHEN Zhidong;ZHANG Jun(School of Electrical Engineering and Automation,Fuzhou University,Fuzhou 350108,China;Fuzhou Power Supply Company,State Grid Fujian Electric Power Co.,Ltd.,Fuzhou 350000,China;Lanzhou Power Supply Company,State Grid Gansu Electric Power Company,Lanzhou 730050,China;Shennongjia Power Supply Company,State Grid Hubei Electric Power Company,Shennongjia 442400,China)
机构地区:[1]福州大学电气工程与自动化学院,福建福州350108 [2]国网福建省电力有限公司福州供电公司,福建福州350000 [3]国网甘肃省电力有限公司兰州供电公司,甘肃兰州730050 [4]国网湖北省电力有限公司神农架供电公司,湖北神农架442400
出 处:《电力自动化设备》2023年第1期73-82,共10页Electric Power Automation Equipment
摘 要:针对多端直流系统故障电流峰值高、上升速度快以及无法保证非故障区域供电可靠性的问题,提出一种适用于中高压配电网的级联式新型柔性故障限流器与机械式直流断路器协同作用的故障隔离策略。首先通过微分欠压保护触发柔性故障限流器,实现极间电压箝位效果,抑制故障电流,提高直流系统故障隔离后的动态恢复特性。其次依据直流断路器的分断速度,实现故障限流器动作时间的灵活设置。利用断路器方向纵联保护信号保证故障区域换流站侧故障限流器的持续作用,直至直流断路器动作隔离故障。该策略还可避免换流站闭锁,降低断路器分断速度与开断容量要求,延长断路器使用寿命,提高系统供电可靠性。最后,在MATLAB/Simulink中搭建四端中压配电网模型,并通过仿真验证故障限流器的效果以及所提策略的可行性。Aiming at the problems of high peak value of fault current,fast rising speed and unable to ensure the reliability of power supply in non-fault area in multi-terminal DC system,a fault isolation strategy based on the cooperation of a cascaded novel flexible current limiter and a mechanical DC circuit breaker is proposed,which is suitable for the medium and high voltage distribution network.Firstly,the flexible current limiter is triggered by differential undervoltage protection to achieve the effect of inter-pole voltage clamping,suppress the fault current and improve the dynamic recovery characteristics of DC system after fault isolation.Secondly,according to the breaking speed of DC circuit breaker,the action time of current limiter can be set flexibly.The directional pilot protection signal of the circuit breaker is used to ensure the continuous action of the current limiter at the converter station side in the fault area until the circuit breaker acts to isolate the fault.This strategy can also avoid the blocking of converter station,reduce the requirements of breaking speed and breaking capacity of circuit breaker,prolong the service life of circuit breaker and improve the reliability of system power supply.Finally,a four-terminal medium voltage distribution network model is built in MATLAB/Simulink,and the effect of current limiter and the feasibility of the proposed strategy are verified by simulation.
关 键 词:多端直流系统 配电网 柔性故障限流器 直流断路器 故障隔离策略 供电可靠性
分 类 号:TM77[电气工程—电力系统及自动化]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.49