检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:孙城皓 孙秋野[1] 王睿[1] 胡杰 Sun Chenghao;Sun Qiuye;Wang Rui;Hu Jie(College of Information Science and Engineering Northeastern University,Shenyang 110819 China)
机构地区:[1]东北大学信息科学与工程学院,沈阳110819
出 处:《电工技术学报》2023年第1期234-245,共12页Transactions of China Electrotechnical Society
基 金:国家重点研发计划变革性课题(2018YFA0702200);国家自然科学基金(62073065)资助项目。
摘 要:连续模型的准确性对于电力电子变换器的特性分析与实时仿真十分重要。由于独特的谐振腔结构,LLC变换器在不同工作频率区间分别以连续电流模式和断续电流模式运行,故而传统方法很难以连续模型实现其多种运行模式的统一描述。为此,该文提出一种基于拓展型双曲正切函数的全桥LLC变换器大信号建模方法。首先,分析各工作频率区间全桥LLC变换器特性,建立一种大信号非连续模型,该模型能够实现LLC变换器多种运行模式的统一描述。然后,构建含陡度因子/脉冲系数的拓展型双曲正切函数,利用其将上述大信号模型连续化,从而建立了全桥LLC变换器的大信号连续模型。基于此模型,连续系统的方法可以被直接应用以实现对变换器特性分析、实时仿真和控制器设计。同时,相比于现有LLC变换器大信号连续模型,该模型具有较低的阶数和更高的精确度。此外,该模型在时域中能够提供次级侧功率器件高准确性的开关信息,便于作为同步整流设计的参考。最后,仿真和实验结果验证了该模型的准确性和有效性。The accuracy of the continuous model is very important for the characteristic analysis, real time simulation and controller design of power electronic converter. LLC resonant converter operates in continuous current mode and discontinuous current mode respectively in different operating frequency intervals due to its unique cavity structure. Therefore, it is difficult to establish a continuous model which can realize the unified description of various operating modes of LLC resonant converter. Therefore, a large signal modeling method for full bridge LLC resonant converter based on extended hyperbolic tangent function is proposed to establish an accurate large signal continuous model. Firstly, the operating characteristics of full bridge LLC resonant converters in each frequency range are analyzed. Based on this analysis, a large signal discontinuity model of full bridge LLC resonant converter is established by using the symbolic function, the absolute value function and the defined operation mode switching function. The discontinuity model can realize the unified description of continuous current mode and discontinuous current mode of full bridge LLC resonant converter. Then, two kinds of extended hyperbolic tangent functions including steepness factor and pulse coefficient are constructed, and the standardized selection methods of steepness factor and pulse coefficient are provided. By changing the steepness factor and pulse coefficient, the dead time and device switching delay time of the full bridge LLC resonant converter can be approximated with high precision, thus realizing accurate large signal modeling. Based on the extended hyperbolic tangent function, the discontinuous model is continuous, and the large signal continuous model of the full bridge LLC converter is established. Based on this model, the method of continuous system can be applied directly to realize the characteristic analysis and controller design of converter. At the same time, compared with the existing LLC resonant converter large signa
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.7