激光切割在碳钢板(Q345R)加工方面的应用研究  

Research on the application of laser cutting in the processing of carbon steel plate(Q345R)

作　　者：孙斌 方亮 吴许祥 陈金盛 戴树晶 丁庆伟 沈店祥 SUN Bin;FANG Liang;WU Xuxiang;CHEN Jinsheng;DAI Shujing;DING Qingwei;SHEN Dianxiang(Jiangsu Jiekai Electric Equipment Co.,Ltd.,Yangzhou 225200,Jiangsu China;Jiangsu Yawei Machine Tool Co.,Ltd.,Yangzhou 225200,Jiangsu China)

机构地区：[1]江苏捷凯电力器材有限公司,江苏扬州225200 [2]江苏亚威机床股份有限公司,江苏扬州225200

出　　处：《锻压装备与制造技术》2022年第6期58-65,共8页China Metalforming Equipment & Manufacturing Technology

摘　　要：采用20KW光纤激光器对40mm以下碳钢(Q345R)进行切割,以36mm为例进行工艺分析。分析板材微量元素、光学配置、BPP值、离焦量控制对高强度碳钢板切割形貌、断面粗超度、断面垂直度的影响。通过研究,我们优化切割头选型搭配和离焦量控制,总结板材材质差异对切割断面的影响,以此达到最佳的切割效果。同时与传统等离子切割碳钢板对比,分析激光切割加工的优势,完善加工产能的升级优化。The 20KW fiber laser is used to cut the carbon steel(Q345R)below 40mm,and the process analysis is made with 36mm as an example.The effects of trace elements,optical configuration,BPP value and defocusing amount control on cutting morphology,section roughness and verticality of high-strength carbon steel plate have been analyzed.Through research,the selection and collocation of cutting heads and the control of defocusing amount have been optimized.The influence of plate material difference on the cutting section has been summarized,so as to achieve the best cutting effect.At the same time,by comparing with the traditional plasma cutting carbon steel plate,the advantages of laser cutting has been analyzed,while the upgrading and optimization of processing capacity have been improved.

关 键 词：激光切割 微量元素 切割头 BPP值 离焦量 

分 类 号：TG485[金属学及工艺—焊接]