检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:孙娈娈 王中华[2,3] Sun Luanluan;Wang Zhonghua(Chongqing Institute of Energy Industry Technicians,Chongqing 400037;State Key Laboratory of Gas Disaster Monitoring and Emergency Technology,Chongqing 400037;China Coal Science and Industry Group Chongqing Research Institute Co.,Ltd.,Chongqing 400037)
机构地区:[1]重庆能源工业技师学院,重庆400037 [2]瓦斯灾害监控与应急技术国家重点实验室,重庆400037 [3]中煤科工集团重庆研究院有限公司,重庆400037
出 处:《山东煤炭科技》2022年第12期99-101,共3页Shandong Coal Science and Technology
基 金:国家重点研发计划资助项目(2017YFC0804206)。
摘 要:为探究突出煤层煤巷上下帮卸压消突规律,采用钻屑解吸指标法现场实测了706顺槽上下帮30 m范围内钻屑瓦斯解吸指标K1值、钻屑量S值,采用DGC瓦斯含量测试仪测试了706顺槽上下帮30 m范围内残余瓦斯含量W,并分析了3个突出表征参数沿着孔深的变化规律,为邻近工作面制定合理有效的防突措施提供依据,以期为类似条件矿井提供借鉴。In order to explore the law of pressure relief and outburst elimination on the upper and lower side of coal roadway in outburst coal seam, the drilling cuttings desorption index method was used to measure the drilling cuttings gas desorption index K1 value and drilling cuttings amount S value within 30 m of the upper and lower sides of the 706 groove, DGC gas content tester was used to test the residual gas content W within 30 m of the upper and lower sides of the 706 groove, and the variation rules of three outburst characterization parameters along the hole depth were analyzed, providing a basis for the development of reasonable and effective outburst prevention measures in the adjacent working faces. It is expected to provide reference for mines with similar conditions.
分 类 号:TD713.3[矿业工程—矿井通风与安全]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:3.144.251.232