检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:刘金生 丁平 杨澎 吕玉婷 杨帆[2] LIU Jinsheng;DING Ping;YANG Peng;LYU Yuting;YANG Fan(Water Conservancy Project Construction Center of Yangzhou City,Yangzhou 225000,China;College of Hydraulic Science and Engineering,Yangzhou University,Yangzhou 225009,China)
机构地区:[1]扬州市水利工程建设中心,江苏扬州225000 [2]扬州大学水利科学与工程学院,江苏扬州225009
出 处:《江苏水利》2023年第1期13-17,27,共6页Jiangsu Water Resources
基 金:国家自然科学基金项目(51609210,51779214);江苏省高校自然科学研究重大项目(20KJA570001);江苏省水利科技项目(2022074)。
摘 要:为确保扬州闸泵站双向潜水贯流泵装置水力性能的优异性,采用物理模型试验方法测试了配有双可调导叶的双向潜水贯流泵装置的能量性能、空化性能和飞逸特性,并对比分析灯泡体位置对双向贯流泵装置水力性能的影响。结果表明:在排涝工况时泵装置采用后置灯泡体(HZ),引水工况为前置灯泡体(QZ)的技术方案。叶片安放角-2°时,扩散可调导叶的调节角20°下HZ泵装置效率为66.2%,流量为267.03 L/s;直可调导叶的调节角12°下QZ泵装置效率为64.1%,流量为250.46 L/s。在排涝工况最高扬程3.81 m时,叶轮的必需汽蚀余量为6.9 m;在引水工况最高扬程1.2 m时,叶轮的必需汽蚀余量为5.8 m。在校核电机和水泵强度时建议采用2.5倍额定转速,确保电机和水泵能在排涝工况381.42 r/min时运转2 min以上。In order to ensure the superiority of the hydraulic performance of the bidirectional submersible tubular pump device in Yangzhou Sluice Pumping Station,the physical model test method was used to test the energy performance,cavitation performance and runaway characteristics of the bidirectional submersible tubular pump device with double adjustable guide vanes,and the influence of the position of the bulb body on the hydraulic performance of the bidirectional tubular pump device was compared and analyzed.The results show that:in the drainage conditions,the pump device adopts rear bulb(HZ),and the water diversion condition is front bulb(QZ).When the blade angle is-2°,the efficiency of the HZ pump device is 66.2%and the flow rate is 267.03 L/s when the adjustment angle of the diffusion adjustable guide vane is 20°.The efficiency of QZ pump is 64.1%and the flow rate is 250.46 L/s when the straight adjusting guide vane adjustable angle is 12°.When the maximum head of drainage is 3.81 m,the necessary cavitation margin of impeller is 6.9 m.When the maximum head of water diversion is 1.2 m,the necessary cavitation margin of the impeller is 5.8 m.When checking the strength of the motor and pump,it is recommended to use 2.5 times the rated speed to ensure that the motor and pump can operate for more than 2 minutes at 381.42 r/min under drainage conditions.
分 类 号:TV698[水利工程—水利水电工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.130