开坯机压下螺丝弹跳原因分析与改进措施  

Analysis of the causes of screw bounce under the billet opening machine and improvement measures

作　　者：马文才 MA Wen-cai(Angang Group Bengang Plate Special Steel Division,Benxi 117000,China)

机构地区：[1]鞍钢集团本钢板材特殊钢事业部,辽宁本溪117000

出　　处：《重型机械》2022年第6期91-94,共4页Heavy Machinery

摘　　要：为解决棒材轧线1150开坯机生产时经常出现的压下螺丝弹跳问题,分析、研究了轧制力、预紧力与弹跳三者之间的相关性,找出了影响压下螺丝弹跳的主要因素是预紧力的设置,本文提出了通过提高上轧辊平衡杠压力,给压下螺丝增加一个预紧力,从而增大螺旋副的摩檫力,最终减少、消除因咬钢时冲击产生的“弹跳”故障。生产实践证明,该方法解决压下螺丝“弹跳”是科学的、有效的,保证了设备的稳定运行。To solve the problems of depressed screw bouncing that often occurs 1150 billet machine in the bar rolling line, the correlation between rolling force, preload force and bounce are carefully analyzed and studied, and finally it is found that the setting of preload is the main factor affecting the depressed screw bounce. This paper proposes to add a preload force to the pressed screw by increasing the pressure of the upper roll balance bar, thereby increase the friction force of the spiral pair, so as to reduce and eliminate the “bounce” fault caused by the impact when biting the steel. The production practice has proved that this method is scientific and effective to solve the “bounce”, and it ensures the stable operation of the equipment.

关 键 词：开坯机 压下螺丝 弹跳 预紧力 

分 类 号：TG333[金属学及工艺—金属压力加工]