汽车后下部防护装置试验结果不确定度评定及研究  

Evaluation and Research on Uncertainty of Test Results of Automobile Rear Lower Protection Test Bench

作　　者：罗煜林 廖国才 LUO Yu-Lin;LIAO Guo-Cai(Longyan Branch of Fujian Special Equipment Supervision and Research Institute,longyan 366400,Fujian,China)

机构地区：[1]福建省特种设备检验研究院龙岩分院,福建龙岩366400

出　　处：《市场监管与质量技术研究》2022年第6期79-82,共4页Market Regulation and Quality Technology Research

摘　　要：为保证汽车后下部防护装置试验结果的可靠性,采用A类、B类不确定度评定方法,对后下部防护装置加载力与最大变形量的试验结果不确定度进行完整评价,得到加载力与最大变形量的不确定度,并与理论计算变形量结果进行对比,得出后下部防护装置最大变形量的区间范围,验证后下防护试验台的试验结果的可靠性。对于汽车后下部防护装置检验检测具有很好的指导意义。In order to ensure the reliability of the test results of the rear lower protection device,the Class A and Class B uncertainty evaluation methods were used to evaluate the uncertainty of the test results of the loading capacity and the maximum deformation of the rear lower protection device,and the uncertainty of the loading force and the maximum deformation is obtained,and the range of the maximum deformation of the rear lower protection device is obtained by comparing with the results of theoretical calculation.It has a good guiding significance for the inspection and detection of automobile rear lower protection device.

关 键 词：后下部防护装置 加载力 最大变形量 不确定度 

分 类 号：U467[机械工程—车辆工程]