异辛醇聚氧丙烯醚硬脂酸酯的合成工艺研究  

Process for the Synthesis of Isooctanol Polyoxypropylene Ether Stearate

作　　者：郑斌 金一丰 万庆梅 房凯 刘志湘 ZHENG Bin;JIN Yi-feng;WAN Qing-mei;FANG Kai;LIU Zhi-xiang(Zhejiang Lukean Chemical Co.,Ltd.,Shaoxing 312369,China;Zhejiang Huangma Technology Co.,Ltd.,Shaoxing 312369,China;Shaoxing Key Laboratory of New Materials for Special Surfactants Co.,Ltd.,Shaoxing 312300,China)

机构地区：[1]浙江绿科安化学有限公司,浙江绍兴312369 [2]浙江皇马科技股份有限公司,浙江绍兴312369 [3]绍兴市特种表面活性剂新材料重点实验室,浙江绍兴312300

出　　处：《精细化工中间体》2022年第6期51-55,共5页Fine Chemical Intermediates

摘　　要：以HPW-SiO_(2)/γ-Al_(2)O_(3)为催化剂,异辛醇聚氧丙烯醚246/362/478和硬脂酸为原料合成了异辛醇聚氧丙烯醚硬脂酸酯。考察了醚酸物质的量比、催化剂用量、反应时间、反应温度、吸水剂用量等因素对酯化率的影响。优化反应条件为:n(异辛醇聚氧丙烯醚)∶n(硬脂酸)=1.02∶1.00,HPW-SiO_(2)/γ-Al_(2)O_(3)为反应物总质量的0.15%,反应时间为4 h,反应温度160℃。优化条件下异辛醇聚氧丙烯醚246/362/478与硬脂酸的酯化率分别为98.01%、97.93%、97.67%。To synthesize isooctanol polyoxypropylene ether stearate HPW-SiO_(2)/γ-Al_(2)O_(3)was used as catalyst,isooctanol polyoxypropylene ether 246/362/478 and stearic acid as raw materials.The effects of etheric acid molar ratio,catalyst dosage,reaction time,reaction temperature,water absorbent dosage and other factors on esterification rate were investigated.The optimal reaction conditions were as the followings:n(isooctanol polyoxypropylene ether):n(stearic acid)was of 1.02∶1.00;HPW-SiO_(2)/γ-Al_(2)O_(3)was 0.15% of the total mass of the reactant;the reaction time was 4 h;and the reaction temperature was 160℃.Under the above conditions,the esterification rates of isooctanol polyoxypropylene ether 246/362/478 and stearic acid were 98.01%,97.93% and 97.67%,respectively.

关 键 词：异辛醇聚氧丙烯醚硬脂酸酯 酯化率 HPW-SiO_(2)/γ-Al_(2)O_(3) 

分 类 号：TQ225.1[化学工程—有机化工]