检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:李润雷 孟景辉 杨树忠 酒昀洋 Li Runlei;Meng Jinghui;Yang Shuzhong;Jiu Yunyang
机构地区:[1]中国铁道科学研究院集团有限公司基础设施检测研究所,北京100081 [2]北京铁科英迈技术有限公司,北京100081
出 处:《铁道通信信号》2022年第12期48-53,58,共7页Railway Signalling & Communication
基 金:中国铁道科学研究院集团有限公司重点项目(2021YJ260)。
摘 要:GSM-R网络在发生越区切换失败等问题时,会影响电路域数据传输服务质量,直接或间接影响列控车载设备和地面设备之间的正常通信,严重时会导致列控系统降级,影响运输组织效率。通过对GSM-R越区切换进行深入研究,针对越区切换失败问题,提出了一种基于动态检测测试终端信令、接口监测信令和电磁环境检测数据的多源数据融合分析方法。结合典型案例分析,对造成切换失败的原因进行了定位。分析结果表明,所提出的分析方法能够确定切换失败的根本原因,对于改善GSM-R网络电路域数据传输服务质量具有较强的现实意义。Handover failure in GSM-R network affects the service quality of circuit switch data transmission,the wireless communication between the train control equipment in the train and on the ground,and even degrades the train control system and affects the efficiency of transportation organization in serious cases.In this paper,a multi-source data comprehensive analysis method based on mobile terminal signaling,interface monitoring signaling and electromagnetic environment inspection data is proposed to solve the problem of GSM-R handover failure.By analysis of the typical case using above method,the cause of the handover failure is located.The result shows that the proposed method can find the root cause of the handover failure,and guide to improve the service quality of circuit switch data transmission of GSM-R network.
关 键 词:GSM-R 电路域数据传输 切换失败 原因定位 动态检测
分 类 号:U285.21[交通运输工程—交通信息工程及控制]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.15