在建船舶管路串油系统的设计与分析  

Design and Analysis of Pipeline Oil String System for Ship Under Construction

作　　者：臧大伟 崔晓敏 郭兴鹍 李嘉源 张振柱 蓝玉 ZANG Dawei;CUI Xiaomin;GUO Xingkun;LI Jiayuan;ZHANG Zhenzhu;LAN Yu(Dalian Shipbuilding Industry Co.,Ltd.,Dalian 116005,Liaoning,China)

机构地区：[1]大连船舶重工集团有限公司,辽宁大连116005

出　　处：《船舶标准化工程师》2023年第1期49-52,共4页Ship Standardization Engineer

摘　　要：为有效去除杂质、清洁船舶管路,根据船舶系统串油清洗的要求,对串油油柜、油泵、滤器及相应附件的设计与选型进行分析。在此基础之上,结合现场施工的要求提出船舶串油系统的设计方案。研究表明:该方案可缩短系统管路串油时间,提高串油效率,降低造船成本。研究成果可为船舶管路串油系统的设计提供一定参考。In order to effectively remove impurities and clean the ship pipeline, the design and selection of string oil tank, oil pump, filter and corresponding accessories are analyzed according to the requirements of ship system string oil cleaning. On this basis, combined with the requirements of on-site construction, the design scheme of the ship oil string system is proposed. The research shows that this scheme can shorten the transmission time of the system pipeline, improve the efficiency and reduce the shipbuilding cost. The research results can provide some references for the design of the ship pipeline oil string system.

关 键 词：在建船舶 串油系统 清洁等级 

分 类 号：TG142.71[一般工业技术—材料科学与工程]