大型水厂普通滤池改造工程实践  

Practice of Common Filter Reconstruction in Large Water Plant

作　　者：张丽芳 钟林 梁仲俊 马彦文 邓子优 ZHANG Li-fang;ZHONG Lin;LIANG Zhong-jun;MA Yan-wen;DENG Zi-you(Guangzhou Water Supply Co.Ltd.,Guangzhou 510000,China;Guangdong Yuhuan Jinghua Environmental Protection Co.Ltd.,Guangzhou 510000,China)

机构地区：[1]广州市自来水有限公司,广州510000 [2]广东玉环净化环保有限公司,广州510000

出　　处：《工程建设与设计》2022年第24期43-45,共3页Construction & Design for Engineering

摘　　要：针对老旧滤池反冲洗单点气冲过大、跑砂、滤后水浊度偏高、池底漏水等问题,将普通滤池原有大阻力模式改造为“滤板+长柄滤头”配水配气模式。本工程对滤池的配气配水系统进行了优化改良,异形配气管改造通过二次配气孔增加空气流速,配气配水均匀性明显提高,降低了滤池反冲洗故障的概率。改造后运行效果良好,滤料层得到充分清洗,提升了滤池的截留能力,延长了运行周期,有效节约了反冲洗水量,从而改善滤后水的水质并节约制水成本。Aiming at the problems such as excessive single point air flushing, sand running, high turbidity of water after filtration and water leakage at the bottom of old filter, the original large resistance mode of ordinary filter was transformed into“filter plate + long handle filter head”water and air distribution mode. In this project, the air and water distribution system of the filter tank was optimized and improved. The special-shaped aeration pipe was modified to increase the air velocity through the secondary air distribution hole, so the uniformity of air and water distribution was significantly improved and the probability of backwash failure of the filter tank was reduced. After the transformation, the operation effect is good, the filter material layer is fully cleaned, the interception capacity of the filter is improved, the operation cycle is prolonged, the backwash water is effectively saved, so as to improve the water quality of the filtered water and save the cost of water production.

关 键 词：普通快滤池 长柄滤头 技术改造 反冲洗 过滤 

分 类 号：TU276.99[建筑科学—建筑设计及理论] TU991.24