基于目标规划法的配电台区无功电压优化  

Research on Reactive Power and Voltage Optimization in Distribution Station Area based on Objective Programming

作　　者：唐成年 Tang Cheng-nian

机构地区：[1]国网新疆电力有限公司阿勒泰供电公司,新疆阿勒泰836599

出　　处：《今日自动化》2022年第12期170-172,共3页Automation Today

摘　　要：在近几年电网发展过程中,越来越多的分布式电源和新型负荷被接入到低压配电网当中,这不仅给低压配电网的电压控制造成了一定的影响,同时还对网损管理工作效益提出了挑战。因此,为了减少以上问题和不足,提出一种目标规划法的配电台区无功电压优化方法。这种方式主要是先结合用户实际情况制定出最高电压、最低电压和网损率的目标值,然后将目标值作为基础,来凑建无功电压优化模型,最后制定出解决措施。基于此,主要对目标规划法的配电台区无功电压优化进行分析研究。In the process of power grid development in recent years,more and more distributed generators and new loads are connected to the low-voltage distribution network,which not only has a certain impact on the voltage control of the low-voltage distribution network,but also poses a challenge to the efficiency of network loss management.Therefore,in order to reduce the above problems and shortcomings,a reactive power and voltage optimization method based on objective programming is proposed.In this way,the target values of the highest voltage,the lowest voltage and the network loss rate are formulated according to the actual situation of the user,and then the target value is taken as the fundamental basis to build the reactive power and voltage optimization model,and finally the solutions are formulated.In this paper,the optimization of reactive power and voltage in distribution station area by objective programming method is analyzed and studied.

关 键 词：目标规划法 配电台区 无功电压 优化措施 

分 类 号：TM714.3[电气工程—电力系统及自动化]