船用锡青铜四联阀箱的砂型铸造工艺  

Sand Casting Technology of Marine Tin Bronze Four-way Valve Box

作　　者：魏良庆[1] 杨为勤 Wei Liangqing;Yang Weiqin(Chongqing Creation Vocational College;Wuchang Shipbuilding Industry Co.,Ltd.)

机构地区：[1]重庆科创职业学院 [2]武昌船舶重工集团有限公司

出　　处：《特种铸造及有色合金》2023年第1期142-144,共3页Special Casting & Nonferrous Alloys

基　　金：重庆市教委2021年度科学技术研究项目(KJQN202105402);重庆市永川区科技局2021年度自然科学基金资助项目(2021yc-jckx20034);重庆科创职业学院2020年度校级重点项目(20KC01)。

摘　　要：锡青铜四联阀箱结构复杂,且要承受4.5 MPa的水压试验,因锡青铜组织疏松,渗漏是主要缺陷,砂型铸造时工艺难度较高。介绍了锡青铜ZCuSn10Zn2的铸造特性,分析了四联阀箱的结构及可能产生的问题,给出了相应的铸造工艺特点。通过采取适当的措施,有效地将四联阀箱的渗漏情况控制在较低的水平,满足了批量生产的需要。Tin bronze four-way valve box has complex structure which is subjected to the hydraulic strength test of 4.5 MPa. Due to the loose structure of tin bronze, leakage is a main defects to be solved, leading to difficulty in sand casting. The casting characteristics of tin bronze ZCuSn10Zn2 was introduced, and the structure and possible problems of four-way valve box were analyzed, and the corresponding principles and casting process were presented. The leakage of the four-way valve box was effectively controlled at a low level through appropriate measures in order to meet the needs of mass production.

关 键 词：锡青铜 四联阀箱 砂型铸造 渗漏 

分 类 号：TG146.11[一般工业技术—材料科学与工程]