棉麻混纺织物纤维含量方法探讨  

Discussion on Fiber Content Method of Cotton and Linen Blended Fabric

作　　者：王海娟 丁文芳 张雪 Wang Haijuan;Ding Wenfang;Zhang Xue(Shandong Product Quality Inspection Reseach Institute,Jinan,Shandong 250102,China)

机构地区：[1]山东省产品质量检验研究院,山东济南250102

出　　处：《天津纺织科技》2022年第6期32-35,共4页Tianjin Textile Science & Technology

摘　　要：棉、麻纤维因其化学性质相似,纤维含量无法用常规的溶解法进行检测,国内检测机构多采用显微镜投影法。文中通过选用已知配比的棉麻混纺织物,按照不同的显微镜投影法进行试验,得到最佳的试验方法。结果表明,FZ/T 30003—2009《麻棉混纺产品定量分析方法显微投影法》最接近真值,适用于亚麻、苎麻、大麻与棉混纺的织物,为最佳试验方法。Because of the similar chemical properties of cotton and linen fiber,the fiber content can’t be detected by conventional dissolution method.Domestic testing institutions mostly use microscope projection method.In this paper,the best test method is obtained by selecting the cotton and linen blended fabric with known ratio and using different microscope projection methods.The results show that FZ/T 30003—2009 microscopic projection method for quantitative analysis of linen-cotton blended products is the closest to the true value,which is applicable to the fabrics of flax,ramie,hemp and cotton,and is the best test method.

关 键 词：棉 麻 混纺 纤维含量 显微镜投影法 配比 

分 类 号：TS107[轻工技术与工程—纺织工程]